Korg Poly800/EX800 Users

hello - i recently acquired an ex800 and was wondering if there is
anyway to get the rack ears for it.. let me know .. tia

I asked the same question a few years ago and basically nobody knew. I
ended up buying a strip of sheet metal from Home Depot, bending it into
a 90-degree angle using a cheap vise, then cutting it using metal shears
to fit. Then spray paint it black. Voila! :-) You can see a pic of
my EX here:

http://www.palancar.net/studio.php?pid=4

Cheers,
Darrell



korgpolyex@yahoogroups.com wrote:

> ________________________________________________________________________
>
> Message: 1
> Date: Sun, 23 Jun 2002 08:25:55 -0000
> From: "sod765" <sod@...>
> Subject: ex800 rack ears
>
> hello - i recently acquired an ex800 and was wondering if there is
> anyway to get the rack ears for it.. let me know .. tia

--
Darrell Burgan
http://www.ampcast.com/palancar
http://palancar.net
darrell@...

I asked the same question a few years ago and basically nobody knew.  I ended up buying a strip of sheet metal from Home Depot, bending it into a 90-degree angle using a cheap vise, then cutting it using metal shears
to fit.


or buy a 4u rack blanking strip (under $20) & mount the EX800 on there using velcro (surprisingly strong) or anything else you can think of.  ok, it wont sit flush against the rack with the rest of the gear but would do the job quite nicely.

}:-)


email:
moose@...

music sites:
http://www.alaskahighwayonline.com
http://www.pigpendigital.com
http://www.mishikawa.com