Korg Poly800/EX800 Users

Thanks for all the good posts, pics and schematics. Im using VCF in pin 
19 on the njm2069 with no problems. Been sending my Mirage rack through 
it today and it sounds great. The EX-800 DCO's mix well with the extra 
input as well. Im assuming it could some type of level control/limiter.

Sending the EX-800 headphone out into the VCF in is noisy lol. Its 
likely not a good idea. Pretty much just makes one squelchy type noise 
across all the patches. Filter and lfo all work though so I suppose a 
special patch bank could be written that took advantage of this 
feedback loop situation.

Looking at MSM5232 on the schematic and attempted to short pins 28 DCO1 
2', 29 DCO1 4', and 34 DCO2 8' with no noticable changes.

Thanks for all the good posts, pics and schematics. Im using VCF in pin 
19 on the njm2069 with no problems. Been sending my Mirage rack through 
it today and it sounds great. The EX-800 DCO's mix well with the extra 
input as well. Im assuming it could some type of level control/limiter.

Sending the EX-800 headphone out into the VCF in is noisy lol. Its 
likely not a good idea. Pretty much just makes one squelchy type noise 
across all the patches. Filter and lfo all work though so I suppose a 
special patch bank could be written that took advantage of this 
feedback loop situation.

Looking at MSM5232 on the schematic and attempted to short pins 28 DCO1 
2', 29 DCO1 4', and 34 DCO2 8' with no noticable changes.