Korg Poly800/EX800 Users

Hi to everybody
I am a poly-800 user and sudenly i have no data on it.I was editing
my sounds and i did something wrong!!!Can anybody help??!!

Hi,

I think that happens to most of us poly800 users at least one time. Me too,
but I still love this machine....

There's a known problem when the 800 is connected via midi to a sequencer
software or something like that.
Scott wrote some weeks ago that it may be helpful if you filter midi events
(remove all data that couldn't be used, just leave note, vel, modulation,
and so on.)

If your data was lost without using midi I don't know about the root cause.

Anyway, you have to install your factory sounds again via data interface,
you'll find the files in this forum.

I hope you didn't loose a lot of self created sounds....

Many greetings,

Olaf

----- Original Message -----
From: "astakoume" <astakoume@...>
To: <korgpolyex@yahoogroups.com>
Sent: Sunday, February 03, 2002 10:59 PM
Subject: [korgpolyex] All data are lost!!


> Hi to everybody
> I am a poly-800 user and sudenly i have no data on it.I was editing
> my sounds and i did something wrong!!!Can anybody help??!!
>
>
>
> To unsubscribe from this group, send an email to:
> korgpolyex-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>

Thank you Olaf!!

This must be the cause.

I do use a software sequencer (logic audio).
Can you,or anybody write me wich one of all these files i have to
download?

Thanks again for your reply ,and yes,i've lost a lot of self created
files but could be worst..!

--- In korgpolyex@y..., "OlGu" <olgu@n...> wrote:
> Hi,
>
> I think that happens to most of us poly800 users at least one time.
Me too,
> but I still love this machine....
>
> There's a known problem when the 800 is connected via midi to a
sequencer
> software or something like that.
> Scott wrote some weeks ago that it may be helpful if you filter
midi events
> (remove all data that couldn't be used, just leave note, vel,
modulation,
> and so on.)
>
> If your data was lost without using midi I don't know about the
root cause.
>
> Anyway, you have to install your factory sounds again via data
interface,
> you'll find the files in this forum.
>
> I hope you didn't loose a lot of self created sounds....
>
> Many greetings,
>
> Olaf
>
>
> ----- Original Message -----
> From: "astakoume" <astakoume@h...>
> To: <korgpolyex@y...>
> Sent: Sunday, February 03, 2002 10:59 PM
> Subject: [korgpolyex] All data are lost!!
>
>
> > Hi to everybody
> > I am a poly-800 user and sudenly i have no data on it.I was
editing
> > my sounds and i did something wrong!!!Can anybody help??!!
> >
> >
> >
> > To unsubscribe from this group, send an email to:
> > korgpolyex-unsubscribe@y...
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> >
> >
> >

Hi,

if you have a mkII then you should only need a *.syx file.

If not, you have to try all of the wave-files, as long as you find one
that's working.
I attached one that worked for my setup (interface via PC-soundcard).
I'm sure it's the same sound patch as stored in the files section, but I had
my problems with those stored files.

But be patient! It may take some trials with different volume settings until
you get a red "Good".

Olaf

----- Original Message -----
From: "astakoume" <astakoume@...>
To: <korgpolyex@yahoogroups.com>
Sent: Monday, February 04, 2002 11:30 PM
Subject: [korgpolyex] Re: All data are lost!!


>
> Thank you Olaf!!
>
> This must be the cause.
>
> I do use a software sequencer (logic audio).
> Can you,or anybody write me wich one of all these files i have to
> download?
>
> Thanks again for your reply ,and yes,i've lost a lot of self created
> files but could be worst..!
>
>
> --- In korgpolyex@y..., "OlGu" <olgu@n...> wrote:
> > Hi,
> >
> > I think that happens to most of us poly800 users at least one time.
> Me too,
> > but I still love this machine....
> >
> > There's a known problem when the 800 is connected via midi to a
> sequencer
> > software or something like that.
> > Scott wrote some weeks ago that it may be helpful if you filter
> midi events
> > (remove all data that couldn't be used, just leave note, vel,
> modulation,
> > and so on.)
> >
> > If your data was lost without using midi I don't know about the
> root cause.
> >
> > Anyway, you have to install your factory sounds again via data
> interface,
> > you'll find the files in this forum.
> >
> > I hope you didn't loose a lot of self created sounds....
> >
> > Many greetings,
> >
> > Olaf
> >
> >
> > ----- Original Message -----
> > From: "astakoume" <astakoume@h...>
> > To: <korgpolyex@y...>
> > Sent: Sunday, February 03, 2002 10:59 PM
> > Subject: [korgpolyex] All data are lost!!
> >
> >
> > > Hi to everybody
> > > I am a poly-800 user and sudenly i have no data on it.I was
> editing
> > > my sounds and i did something wrong!!!Can anybody help??!!
> > >
> > >
> > >
> > > To unsubscribe from this group, send an email to:
> > > korgpolyex-unsubscribe@y...
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> > >
> > >
> > >
>
>
>
> To unsubscribe from this group, send an email to:
> korgpolyex-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>

Hi,
Thank you one more time for the attached file.
I don't have the mkII. So... I'm still trying to find the right
volume setting.But I only get a red "E r r".

Still waiting for the red "Good"

Stathis

--- In korgpolyex@y..., "OlGu" <olgu@n...> wrote:
> Hi,
>
> if you have a mkII then you should only need a *.syx file.
>
> If not, you have to try all of the wave-files, as long as you find
one
> that's working.
> I attached one that worked for my setup (interface via PC-
soundcard).
> I'm sure it's the same sound patch as stored in the files section,
but I had
> my problems with those stored files.
>
> But be patient! It may take some trials with different volume
settings until
> you get a red "Good".
>
> Olaf
>
>