Korg Poly800/EX800 Users

By accident I discovered that I can control the MG VCF (parameter 85)
from an external controller with controller # 2.
Does anyone know the complete list of controller #'s that can control
parameters on the EX800?

Thanks.
Jeff

Here they are:

1 - Modulation wheel
2 - VCF Modulation
7 - Master Volume
125 - Omni on
126 - Mono on

Not very inspiring is it.

That's why you need to hang around for the new EX800 mod that will
give you total control of ALL parameters.

Speaking of which, I just today completed the patch send and receive
sysex implementation. Using MIDI-OX I was able to request individual
patches and then send them back to other patch locations.

Next step is to write a jsynthlib module to allow copying and editing
patches.

So stay tuned.

Mike.

-- In korgpolyex@yahoogroups.com, "jhopp815" <jhopp21@...> wrote:

>
> By accident I discovered that I can control the MG VCF (parameter 85)
> from an external controller with controller # 2.
> Does anyone know the complete list of controller #'s that can control
> parameters on the EX800?
>
> Thanks.
> Jeff
>

Exciting news Mike! I'd been thinking of selling my EX
but, after hearing what you've got cooking, I believe
I'll hang in there for a while.

Cheers.....Cristofe
http://www.myspace.com/cristofe

--- In korgpolyex@yahoogroups.com, "korgpolyex800"
<korgpolyex800@...> wrote:

>
> Here they are:
>
> 1 - Modulation wheel
> 2 - VCF Modulation
> 7 - Master Volume
> 125 - Omni on
> 126 - Mono on
>
> Not very inspiring is it.
>
> That's why you need to hang around for the new EX800 mod that will
> give you total control of ALL parameters.
>
> Speaking of which, I just today completed the patch send and receive
> sysex implementation. Using MIDI-OX I was able to request individual
> patches and then send them back to other patch locations.
>
> Next step is to write a jsynthlib module to allow copying and

editing

> patches.
>
> So stay tuned.
>
> Mike.
>
> -- In korgpolyex@yahoogroups.com, "jhopp815" <jhopp21@> wrote:
> >
> > By accident I discovered that I can control the MG VCF (parameter

85)

> > from an external controller with controller # 2.
> > Does anyone know the complete list of controller #'s that can

control

> > parameters on the EX800?
> >
> > Thanks.
> > Jeff
> >
>