Korg Poly800/EX800 Users

I just started experiencing this problem on my EX800:
After being on for anywhere between 1/2 an hour to 1 hour, the left(mono) output
cacks out. There is almost no output and what is there is distorted. When I
wiggle the cord at the jack or pull it out and re-insert it, it makes no
difference. No crackle or anything. If I insert into the right output, it's
fine. I did kind of trip on the cord a little just before it started happening,
so I thought maybe I cracked a solder point, but with that senario, I would have
expected intermittent output when wiggling the connection.
I'll check for a solder crack anyway, but I'm wondering what else it might be,
if it's not that. The unit was also in a fire about 5 years ago. Any wise
thoughts on this?
Thanks,
Shayne

>I just started experiencing this problem on my EX800:
>After being on for anywhere between 1/2 an hour to 1 hour, the left >(mono)
>output cacks out. There is almost no output and what is there is
> >distorted. When I wiggle the cord at the jack or pull it out and
>re->insert it, it makes no difference. No crackle or anything. If I insert
> >into the right output, it's fine. I did kind of trip on the cord a
> >little just before it started happening, so I thought maybe I cracked >a
>solder point, but with that senario, I would have expected >intermittent
>output when wiggling the connection. I'll check for a >solder crack anyway,
>but I'm wondering what else it might be, if it's >not that. The unit was
>also in a fire about 5 years ago. Any wise >thoughts on this?

sounds like it may be heat related. get some component cooler spray...

_________________________________________________________________
Join the world�s largest e-mail service with MSN Hotmail.
http://www.hotmail.com