Korg Poly800/EX800 Users

Hi Poly fans,

I am in the middle of disassembling the sysex section of the EX-800 code.

Does anyone have any MIDI implementation document?

Here is what I know.

I know I can request a SYSEX dump by sending F0 42 21 01 10 F7 to the
EX800.

And I also know that if I want to send a sysex dump to the EX800 then
the dump will start with f0 42 21 01 00. So it appears that the 10 or
00 determines the type of dump (01=send dump and 00=receive dump).

By the way, does anyone have any recommendation on a MIDI data send
and receiver/viewer that runs on Windows platform. Then I would be
able to send, receive and view the MIDI in hex format.

Thanks for all your help.

Mike H

> Does anyone have any MIDI implementation document?

About the EX in particular or just plain midi specification? The
latter can easily be found by google.

> By the way, does anyone have any recommendation on a MIDI data send
> and receiver/viewer that runs on Windows platform. Then I would be
> able to send, receive and view the MIDI in hex format.

Try Midiox.

Thanks for the tip to Midiox. I'll check it out.

I already have all the MIDI spec's themselves (an original MIDI
Specification 1.0 document too!).

I was asking the MIDI implementation question as specific to the EX-800.

Thanks,

Mike H.

--- In korgpolyex@yahoogroups.com, "austeritygirlone" <ziggystar@...>
wrote:

>
> 
> > Does anyone have any MIDI implementation document?
> 
> About the EX in particular or just plain midi specification? The
> latter can easily be found by google.
> 
> > By the way, does anyone have any recommendation on a MIDI data send
> > and receiver/viewer that runs on Windows platform. Then I would be
> > able to send, receive and view the MIDI in hex format.
> 
> Try Midiox.
>

Mike,

In the files section of this group there is a document called P800mdk-rom-docs.pdf in the 
technical section.
Is this what you are looking for ?

André

--- In korgpolyex@yahoogroups.com, "patrioticduo" <patrioticduo@...> wrote:

>
> Hi Poly fans,
> 
> I am in the middle of disassembling the sysex section of the EX-800 code.
> 
> Does anyone have any MIDI implementation document?
> 
> Here is what I know.
> 
> I know I can request a SYSEX dump by sending F0 42 21 01 10 F7 to the
> EX800.
> 
> And I also know that if I want to send a sysex dump to the EX800 then
> the dump will start with f0 42 21 01 00. So it appears that the 10 or
> 00 determines the type of dump (01=send dump and 00=receive dump).
> 
> By the way, does anyone have any recommendation on a MIDI data send
> and receiver/viewer that runs on Windows platform. Then I would be
> able to send, receive and view the MIDI in hex format.
> 
> Thanks for all your help.
> 
> Mike H
>