Synth-DIY Yahoo! Groups Archives

Thread

RES: [korgpolyex] Re: hi im new here

2005-04-05 by THIAGO Montenegro

Hey, thanks for all the explanation... It was really helpful… I’m in digikeys.com and the knobs I bought seems really cheap so I’m thinking about buy a new ones there. Anyone could point one? An another doubt I have (reading the past e-mails) is:

I could limit the resonance putting it down to 10 in the digital display… fine.

So that means this is a relative value in which the resonance will still be affected… Is this the same with cutoff? Do I have to to change it in the LCD to achieve all its range?

If so, you can maintain the patches “heterogenity” with different cutoff and resonances settings in each one, independentely of the knobs position, right? Is the display range bigger or the same of the knob range? How much the mod increases this range?

Hope you understand what I mean…:D

Thanks
ThiagoM

De: Atom Smasher [mailto:atom@...]
Enviada em: segunda-feira, 4 de abril de 2005 01:22
Para: korgpolyex@yahoogroups.com
Assunto: Re: [korgpolyex] Re: hi im new here

On Mon, 4 Apr 2005, iheartvinyl@... wrote:

> another problem i have is that my poly might have an output problem. on
> most but not all patches, the sound comes out crackly like a dusty
> record. is this normal? i'm not sure if i should hope for it to be
> normal or not. if it is normal, i know i don't have a problem, but if
> it's abnormal, i guess i have something to fix. if anyone has had this
> problem, let me know, and thanks for the help
==============

that's not normal.

--
...atom

_________________________________________
PGP key - http://atom.smasher.org/pgp.txt
762A 3B98 A3C3 96C9 C6B7 582A B88D 52E4 D9F5 7808
-------------------------------------------------

"The only normal people are
those you don't know very well!"
-- Joe Ancis

Re: RES: [korgpolyex] Re: hi im new here

2005-04-05 by Joseph Ralston

I know what you are talking about here. If you want the 50k ohm pots from digikey they are part numbers:

574SS503-ND (potentiometer) $2.52US each

226-1033-ND (alum knob black) $4.73US each

BH32T-C-ND (battery holder mod) .97US each

P189-ND (Panasonic battery for Poly800) .34US each

Hope that helps.

As far as setting the internal values of the poly 800 for cutoff and resonance: Yes, the internal values do affect the knobs. For example, on resonance you shouldn't go any higher than 12 or you will get the sqwealing. the cutoff does not matter so much, but you can tell a difference when you raise it up to say 50-99. For many patches that have values of 0 set for cutoff and resonance the knobs will appear to do nothing. You need to adjust the values for cuttof (41) and resonance (42) to make the knobs do something. Hope this helps. If anyone has info to the contrary, please let me know.

Thanks,

lanrosta

THIAGO Montenegro <thiago@...> wrote:

Hey, thanks for all the explanation... It was really helpful� I�m in digikeys.com and the knobs I bought seems really cheap so I�m thinking about buy a new ones there. Anyone could point one? An another doubt I have (reading the past e-mails) is:

I could limit the resonance putting it down to 10 in the digital display� fine.

So that means this is a relative value in which the resonance will still be affected� Is this the same with cutoff? Do I have to to change it in the LCD to achieve all its range?

If so, you can maintain the patches �heterogenity� with different cutoff and resonances settings in each one, independentely of the knobs position, right? Is the display range bigger or the same of the knob range? How much the mod increases this range?

Hope you understand what I mean�:D

Thanks
ThiagoM

De: Atom Smasher [mailto:atom@...]
Enviada em: segunda-feira, 4 de abril de 2005 01:22
Para: korgpolyex@yahoogroups.com
Assunto: Re: [korgpolyex] Re: hi im new here

On Mon, 4 Apr 2005, iheartvinyl@... wrote:

> another problem i have is that my poly might have an output problem. on
> most but not all patches, the sound comes out crackly like a dusty
> record. is this normal? i'm not sure if i should hope for it to be
> normal or not. if it is normal, i know i don't have a problem, but if
> it's abnormal, i guess i have something to fix. if anyone has had this
> problem, let me know, and thanks for the help
==============

that's not normal.

--
...atom

_________________________________________
PGP key - http://atom.smasher.org/pgp.txt
762A 3B98 A3C3 96C9 C6B7 582A B88D 52E4 D9F5 7808
-------------------------------------------------

"The only normal people are
those you don't know very well!"
-- Joe Ancis

Yahoo! Messenger
Show us what our next emoticon should look like. Join the fun.

Re: RES: [korgpolyex] Re: hi im new here

2005-04-06 by Atom Smasher

On Tue, 5 Apr 2005, THIAGO Montenegro wrote:

> I could limit the resonance putting it down to 10 in the digital
> display... fine.
>
> So that means this is a relative value in which the resonance will still
> be affected... Is this the same with cutoff? Do I have to to change it
> in the LCD to achieve all its range?
>
> If so, you can maintain the patches "heterogenity" with different cutoff
> and resonances settings in each one, independentely of the knobs
> position, right? Is the display range bigger or the same of the knob
> range? How much the mod increases this range?

=================

from <http://synthmod.net/korg/moog_slayer/notes/>:

After doing this mod, the the digital setting for resonance (0-15) now
sets the upper limit that the resonance knob is capable of. So, if it's
set to 10, you should be safe from blowing anything up. If it's turned up
to 15, then the resonance knob is capable of doing damage. The lower range
of the resonance knob is not affected by the range that's set digitally.

The digital setting for the cutoff (0-99) adjusts the overall range of the
knob. A higher or lower setting digitally will raise or lower both the top
and bottom of the range that the knob is capable of.

Despite the insane range that this allows, the LFO and EG3 are still
capable of pushing it even further.

--
...atom

_________________________________________
PGP key - http://atom.smasher.org/pgp.txt
762A 3B98 A3C3 96C9 C6B7 582A B88D 52E4 D9F5 7808
-------------------------------------------------

"I am often asked if I still think we should invade their
countries, kill their leaders, and convert them to
Christianity. The answer is: Now more than ever!"
-- Ann Coulter,
How to Talk to a Liberal (If You Must)

Re: RES: [korgpolyex] Re: hi im new here

2005-04-06 by russ

nice ann coulter quote, she really is evil

Atom Smasher <atom@...> wrote:

On Tue, 5 Apr 2005, THIAGO Montenegro wrote:

> I could limit the resonance putting it down to 10 in the digital
> display... fine.
>
> So that means this is a relative value in which the resonance will still
> be affected... Is this the same with cutoff? Do I have to to change it
> in the LCD to achieve all its range?
>
> If so, you can maintain the patches "heterogenity" with different cutoff
> and resonances settings in each one, independentely of the knobs
> position, right? Is the display range bigger or the same of the knob
> range? How much the mod increases this range?
=================

from <http://synthmod.net/korg/moog_slayer/notes/>:

After doing this mod, the the digital setting for resonance (0-15) now
sets the upper limit that the resonance knob is capable of. So, if it's
set to 10, you should be safe from blowing anything up. If it's turned up
to 15, then the resonance knob is capable of doing damage. The lower range
of the resonance knob is not affected by the range that's set digitally.

The digital setting for the cutoff (0-99) adjusts the overall range of the
knob. A higher or lower setting digitally will raise or lower both the top
and bottom of the range that the knob is capable of.

Despite the insane range that this allows, the LFO and EG3 are still
capable of pushing it even further.

--
...atom

_________________________________________
PGP key - http://atom.smasher.org/pgp.txt
762A 3B98 A3C3 96C9 C6B7 582A B88D 52E4 D9F5 7808
-------------------------------------------------

"I am often asked if I still think we should invade their
countries, kill their leaders, and convert them to
Christianity. The answer is: Now more than ever!"
-- Ann Coulter,
How to Talk to a Liberal (If You Must)

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com