"btw: i can't identify in the parts i received which one would be the replacement.
so i had to go with the old one anyway - so that's a word of caution to anyone
inclined to just cut it out.
does the replacement have a different number on it, Mike? i'll check on the BOM."
The replacement is the 16 pin socket. And the 16 pin ribbon cable plugs into that.
It's Ok to test as you go along but you are going to have to remove the IC29 chip to make way for the ribbon cable.
/Mike
On Sun, 2019-09-01 at 10:37 +0000, domgoold@... [korgpolyex] wrote:
phew - extremely happy and relieved to report that everything seems to beworking as normal, having fitted the DIl, and can even re-use the old IC29.(still has patches in memory and even the sequence i had on it runs)horrible moment there, thinking OMG i'm going to have to box this up and send itto a distant tech to sort out, at huge expense.. but hopefully no, this seems ok.btw: i can't identify in the parts i received which one would be the replacement.so i had to go with the old one anyway - so that's a word of caution to anyoneinclined to just cut it out.does the replacement have a different number on it, Mike? i'll check on the BOM.i was seriously careful doing all this, but there's still points where you can mess upif you're not ready f or them. i freaked out after flowing the DIL points because it wentright through to the other side and looked messy, with even a big blob. total horror moment.use flux ! this was the magic trick. luckily i had some.