Mike,
(And thanks all for your input!)
Thanks a lot, it was indeed P2 85 set to zero. As soon as I set it to full bend everything started to work :)
I only have to recall how do I save changes made to the patch. If I switch to another patch and come back P2 85 is again set to 0.
(And thanks all for your input!)
Regards
Tim
---In korgpolyex@yahoogroups.com, <korgpolyex800@...> wrote :
---In korgpolyex@yahoogroups.com, <korgpolyex800@...> wrote :
Tim,
If you have the HAWK installed you will need to make sure that the bend parameter P2 85 is set high. Maximum bend depth is 63. No bend = 0.
/Mike
On Monday, September 29, 2014 4:27 PM, "Malte Rogacki gacki@... [korgpolyex]" <korgpolyex@yahoogroups.com> wrote:
Hi;
if I recall correctly KLM601 or KLM601a are responsible for setting the
bend range in either direction. If there's a failure on this board one bend
direction will be missing.
if I recall correctly KLM601 or KLM601a are responsible for setting the
bend range in either direction. If there's a failure on this board one bend
direction will be missing.