On 22/12/12 12:56, L wrote:
that in the manual, but in practice it's better to use something a bit
heavier.
For all my 9V gear, if it's on a separate wall-wart I use a 9V 1A PSU
(because I bought a large box of them) and for the stuff that's racked
up I have a single regulated 9V 6.A unit that is split out to everything.
--
Gordonjcp MM0YEQ
> This is a good question...300mA is not really enough to run even a stock Poly 800. I know it says
> I agree with using the stock 300ma psu for a stock Poly.
> What kind of power does the Atomahawk need?
> Any ideas Mike?
that in the manual, but in practice it's better to use something a bit
heavier.
For all my 9V gear, if it's on a separate wall-wart I use a 9V 1A PSU
(because I bought a large box of them) and for the stuff that's racked
up I have a single regulated 9V 6.A unit that is split out to everything.
--
Gordonjcp MM0YEQ