Are you sure about that? From what I have been told, the unit
will draw as many milliamps as it needs, it's the voltage that
matters... Feel free to correct me if I'm wrong, but refs would
be appreciated! =)
Brandon
will draw as many milliamps as it needs, it's the voltage that
matters... Feel free to correct me if I'm wrong, but refs would
be appreciated! =)
Brandon
--- On Tue 03/25, OlGu < olgu@... > wrote:From: OlGu [mailto: olgu@...]
To: korgpolyex@yahoogroups.com
Date: Tue, 25 Mar 2003 22:04:23 +0100
Subject: Re: [korgpolyex] poly800 power supply
You can use any universal power supply that comes with different voltages and connector adaptors.
But it should have 300-500mA max., because it delivers higher voltages if the power consumption is too low.
(I use "7.5V" switch position with 500mA power supply and measure about 9V while working with my Poly800)
And be sure to use the right polarity.
Olaf----- Original Message -----From: Neil SauerweinTo: korgpolyex@yahoogroups.comSent: Tuesday, March 25, 2003 3:42 PMSubject: [korgpolyex] poly800 power supply
Does anyone know where I can get a replacement for the 9 volt power supply?
Thanks
To unsubscribe from this group, send an email to:
korgpolyex-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
To unsubscribe from this group, send an email to:
korgpolyex-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
No banners. No pop-ups. No kidding.
Introducing My Way - http://www.myway.com