Check that global 16 matches your Bank Select MSB.
Global 16 defaults to 1. So you should send the bank select MSB as 1.
Or, if you're sending zero for the MSB then set global 16 to zero.
Mike
Global 16 defaults to 1. So you should send the bank select MSB as 1.
Or, if you're sending zero for the MSB then set global 16 to zero.
Mike
From: Michael Hawkins <korgpolyex800@...>
To: "korgpolyex@yahoogroups.com" <korgpolyex@yahoogroups.com>
Sent: Saturday, October 20, 2012 9:52 PM
Subject: Re: [korgpolyex] CC#32 Bank Select??
To: "korgpolyex@yahoogroups.com" <korgpolyex@yahoogroups.com>
Sent: Saturday, October 20, 2012 9:52 PM
Subject: Re: [korgpolyex] CC#32 Bank Select??
I shall have a look tomorrow and check to make sure this works.
Mike
From: bimmerfan222
<bperkins211@...>
To: korgpolyex@yahoogroups.com
Sent: Saturday, October 20, 2012 1:45 PM
Subject: [korgpolyex] CC#32 Bank Select??
To: korgpolyex@yahoogroups.com
Sent: Saturday, October 20, 2012 1:45 PM
Subject: [korgpolyex] CC#32 Bank Select??
I ran into a CC that has stumped me...
I setup a dropdown menu to pick Bank1, Bank2, Bank3, Bank4
I used CC#32 and use 0=B1 32=B2, 64=B3 & 96=B4
I get no reaction from the HAWK.. going manually into Global Mode will change Banks, but nada from the CC
any ideas? I saw the Midi Imp. chart says "32 Bank Select (LSB)". Then the description states, "uses two most significant bits so that you should send bank select data as 0-31=bank1,..."
Is this CC setup differently than the other standard CC's like VCF cutoff??
-Blaine
I setup a dropdown menu to pick Bank1, Bank2, Bank3, Bank4
I used CC#32 and use 0=B1 32=B2, 64=B3 & 96=B4
I get no reaction from the HAWK.. going manually into Global Mode will change Banks, but nada from the CC
any ideas? I saw the Midi Imp. chart says "32 Bank Select (LSB)". Then the description states, "uses two most significant bits so that you should send bank select data as 0-31=bank1,..."
Is this CC setup differently than the other standard CC's like VCF cutoff??
-Blaine