I shall have a look tomorrow and check to make sure this works.
Mike
From: bimmerfan222
<bperkins211@...>
To: korgpolyex@yahoogroups.com
Sent: Saturday, October 20, 2012 1:45 PM
Subject: [korgpolyex] CC#32 Bank Select??
To: korgpolyex@yahoogroups.com
Sent: Saturday, October 20, 2012 1:45 PM
Subject: [korgpolyex] CC#32 Bank Select??
I ran into a CC that has stumped me...
I setup a dropdown menu to pick Bank1, Bank2, Bank3, Bank4
I used CC#32 and use 0=B1 32=B2, 64=B3 & 96=B4
I get no reaction from the HAWK.. going manually into Global Mode will change Banks, but nada from the CC
any ideas? I saw the Midi Imp. chart says "32 Bank Select (LSB)". Then the description states, "uses two most significant bits so that you should send bank select data as 0-31=bank1,..."
Is this CC setup differently than the other standard CC's like VCF cutoff??
-Blaine
I setup a dropdown menu to pick Bank1, Bank2, Bank3, Bank4
I used CC#32 and use 0=B1 32=B2, 64=B3 & 96=B4
I get no reaction from the HAWK.. going manually into Global Mode will change Banks, but nada from the CC
any ideas? I saw the Midi Imp. chart says "32 Bank Select (LSB)". Then the description states, "uses two most significant bits so that you should send bank select data as 0-31=bank1,..."
Is this CC setup differently than the other standard CC's like VCF cutoff??
-Blaine