I ran into a CC that has stumped me...
I setup a dropdown menu to pick Bank1, Bank2, Bank3, Bank4
I used CC#32 and use 0=B1 32=B2, 64=B3 & 96=B4
I get no reaction from the HAWK.. going manually into Global Mode will change Banks, but nada from the CC
any ideas? I saw the Midi Imp. chart says "32 Bank Select (LSB)". Then the description states, "uses two most significant bits so that you should send bank select data as 0-31=bank1,..."
Is this CC setup differently than the other standard CC's like VCF cutoff??
-Blaine
I setup a dropdown menu to pick Bank1, Bank2, Bank3, Bank4
I used CC#32 and use 0=B1 32=B2, 64=B3 & 96=B4
I get no reaction from the HAWK.. going manually into Global Mode will change Banks, but nada from the CC
any ideas? I saw the Midi Imp. chart says "32 Bank Select (LSB)". Then the description states, "uses two most significant bits so that you should send bank select data as 0-31=bank1,..."
Is this CC setup differently than the other standard CC's like VCF cutoff??
-Blaine