Korg Poly800/EX800 Users

looks like they go for about $100, according to the last completed listing that sold.


Any comment about those CC#'s next to the parameters on the Parameter Quick Reference chart?

Like VCF cutoff has CC#24, Resonance Set Point CC#96.



--- In korgpolyex@yahoogroups.com, Michael Hawkins <korgpolyex800@...> wrote:
>
> Actually, I have the Remote 25. Not the SL.
> 
> http://www.ebay.com/itm/Novation-Remote-25-Midi-Keyboard-PSU-/230845437127?pt=Midi_Controllers&hash=item35bf75d4c7
> 
> Yeah, really, really cheap now.
> 
> Mike
> 
> 
> 
> ________________________________
>  From: Michael Hawkins <korgpolyex800@...>
> To: "korgpolyex@yahoogroups.com" <korgpolyex@yahoogroups.com> 
> Sent: Tuesday, September 4, 2012 1:14 PM
> Subject: Re: [korgpolyex] Re: CC issues...
>  
> 
> Â  
> I use a Novation RemoteSL25. I am not a professional muso though. I just use it because it works for me.
> 
> And it was cheap!
> 
> 
> Mike
> 
> 
> 
> ________________________________
>  From: bimmerfan222 <bperkins211@...>
> To: korgpolyex@yahoogroups.com 
> Sent: Tuesday, September 4, 2012 10:33 AM
> Subject: [korgpolyex] Re: CC issues...
>  
> 
> Â  
> 
> 
> After some more digging, I found the three ways you mentioned.
> 
> I guess for now I'm stuck with the little freeware CC apps that are not NRPN configurable.
> I searched and searched for software I can use on a PC to send NRPN's when a virtual slider/knob is moved..  can't seem to find one to download to try out.
> 
> Do you or anyone on here know of an app that is simple sliders/knobs that can do NRPN's?  Freeware would be nice.. but I couldnt seem to find one.
> 
> What NRPN capable controller do you use Mike?
> 
> And lastly.. just what are those CC#'s next to each parameter on the Quick Reference sheet?  That's what got me confused in the beginning.
> 
> The "controller friendly" method you included isnt so bad after all..  It just took a little getting use to at first.
> But to do what I want, it looks like I'll be diving into NRPN controls so I can assign knobs to any parameter from any Parameter Bank.
> 
> -Blaine
> 
> --- In korgpolyex@yahoogroups.com, Michael Hawkins <korgpolyex800@> wrote:
> >
> > read the MIDI implementation chart again mate.
> > 
> > VCF Resonance CC #71
> > VCF cut off CC #74
> > 
> > Then read pages 31 and 32 in the owners manual.
> > 
> > You have no less than THREE different ways to do what you want.
> > 
> > NRPN CC's, my own "quick parameter change" method, and my own controller friendly method (that's the one you are frustrated by.
> > 
> > The standard way that most recent controllers support is the NRPN method.
> > 
> > But the others work, I just retested them again and they're all good.
> > 
> > Enjoy!
> > 
> > Mike
> > 
> > 
> >
>