Korg Poly800/EX800 Users

Well I got around to hooking up my HAWK up to a software midi CC.

I've tried both MidiJoys and Unicontrol (freeware).


What happens is it controls STANDARD Midi CC's.. like #7 is Main Volume, #71 is Resonance, #74 is Filter Cutoff...

The CC's I set on the software does not match up to the CC's for the HAWKS parameters as shown in the Quick Reference pdf.

If I tried to use CC#24 on the software slider for the filter cutoff (Parameter P2 41), the HAWK would change Parameter 12 instead.  Plus it would show "CC 12 01" on the screen while I moved the software slider control (When I stop moving a slider, the "CC ** **" will change back to the previous display.), it will do this for#23 thru #30 incrementally.
CC#30 from the software changes parameter 18.

It stops there, then when I use CC#31 it will show patch "11 *P".. the "*" will go up in value 1-8.



There's other odd things that happen as well.. but obviously the point is that I want to make CC#24 change the filter cutoff as stated in the Quick Reference sheet, CC#96 to adjust the Resonance Set Point...  as well as all the other CC's assigned to each and every single parameters in a single patch.

Is there a setting in the HAWK I need to change?