Hi Gordon, thanks for the reply. Surely there is a way to slip in a rotary encoder to mimic a up\down value keys.. I was thinking of using this decoder by elmelectronics.com http://elmelectronics.com/DSheets/ELM402DS.pdf couldnt the outputs be placed in parallel with the value switches? It can be set to generate 2.0msec pulses on two channels --- In korgpolyex@yahoogroups.com, Gordon JC Pearc e <gordon@...> wrote: > > On 08/04/12 16:09, bimmerfan222 wrote: > > > I've yet to see an 800 with this simple, yet very helpful mod and am a little dumbfounded that it has not yet been done. > > Debouncing is key to getting a smooth signal out to the triggers, otherwise you'd end up getting wild jumps in up/down values when moving the knob slow or fast. > > No, you won't. > > You'll get a rotary encoder that has to be turned painfully slowly to > avoid it missing steps. The buttons are already debounced, and have > quite a long debounce time. > > -- > Gordonjcp MM0YEQ >
Message
Re: rotary data dial +/-
2012-04-10 by bimmerfan222