The one called VCF_DRIFT_PROBLEM.mp3
Em 03/08/2011 17:03, 7yash < josh.nursing@... > escreveu:
Ow, I noticed something wrong with the sounds of the Poly-800 yesterday and thought I could fix it with a transfer of the sounds from the computer again, but no!
Inside, I understood what went wrong, at least the cause: a screw was moving around on the main board and has most probably caused a short...
Results:
1. When the Cutoff Frequency knob is turned to min, there is a swooshing sound as if the Cutoff is being modulated (even if I turn MG off)...
2. Sounds thin out on some keys, but sometimes the keys get their volume up again after playing other keys...
The oscillators seem fine (doesn't help, I don't really care about them :P )
What should I verify or fix?
Needless to say, it's a bit disheartening after all the successful mods I made and their ergonomic placement ;) and right before I was embarking on what could have been the best mod ever.
Help!