The only signal that is available on the Poly is the noise gate.
You could tap into the noise gate
signal. This signal comes on as soon as any note is held and remains on
until all notes EG releases and EG3 release finishes.
Not quite what you're after but worth mentioning.
If you had the HAWK kit I could provide you with exactly what you want! :-)
Mike
From: 7yash <josh.nursing@...>
To: korgpolyex@yahoogroups.com
Sent: Tuesday, August 2, 2011 4:39 PM
Subject: [korgpolyex] Tapping into the Key On state.
To: korgpolyex@yahoogroups.com
Sent: Tuesday, August 2, 2011 4:39 PM
Subject: [korgpolyex] Tapping into the Key On state.
I would need to tap into the Korg's Key ON state and have a circuit to do this:
Send an ON signal on every Key ON, maintain that state for a very short time and switch to OFF without waiting for Key OFF.
How would I do this?
Send an ON signal on every Key ON, maintain that state for a very short time and switch to OFF without waiting for Key OFF.
How would I do this?