On Wed, Jul 27, 2011 at 3:15 PM, <billmeirelles@...> wrote:What you can do is to have 1 CV input for the VCF FREQ, 1 for RES, 1 FOR DCO1 LEVEL
and one for DCO2 LEVEL. I'm working on a pasive AC/DC box with voltage doublers and
attenuators for use with Silent Way, I'll start to sell them soon, they have 4 inputs, 4
outputs, 4 attenuators, 4 voltage doublers, you can choose between a full wave rectifier
and the voltage doubler for each channel and you can choose between 2 types of CAPS,
0.1µ or 0.47µ on each channel too, all in a die cast hammond case for $120 plus shipping,
let me know if you want 1 of these boxes.Bill, a question about using Silent Way with the Poly-800.
Let's imagine I can use 4 different Silent Way CV signals to send to the Poly-800, and the latter does have 4 CV inputs into the VCF chip.
Do I need to be careful about the combined Control Voltage amounts and try to keep it below 7V or 8V in total?
--Josh NursingSkype (preferred): yashnurGoogle Chat: josh.nursing@...Cell: +1 (514) 652 9738------------------------------------------http://twitter.com/joshnursinghttp://touch.yashlabs.com - YashLabs Touch - Tablet, Mobile & Touch software
http://www.yashlabs.com - YashLabs - Finance, Technology and the Pursuit of Alpha Beauty
Message
Re: [korgpolyex] Silent Way and CVs - Re: FM-800 mod demo and two interesting questions.
2011-07-27 by Josh Nursing
These are the 4 CV inputs I was thinking about actually.
So, if I want to combine 4 of them, I should make sure than the total CV inputs are less than 7V or 8V, then, right?
I'm in the DIY craze, so I'll experiment rather than buy, but judging by the quality of the mods you made to the Poly-800, I'm sure this box will be very well done indeed!