It's not a good choice, you can run into problems like noise in the audio source
and significant voltage drop, the best way is to have a connector for CV input and
a connector for audio input, if you want audio to be used as CV you need a rectfier,
if you want the same audio modulating the VCF and at the same time as a external
audio source you can send a stereo signal to both connectors.
Em 22/07/2011 19:54, 7yash < josh.nursing@... > escreveu:
and significant voltage drop, the best way is to have a connector for CV input and
a connector for audio input, if you want audio to be used as CV you need a rectfier,
if you want the same audio modulating the VCF and at the same time as a external
audio source you can send a stereo signal to both connectors.
Em 22/07/2011 19:54, 7yash < josh.nursing@... > escreveu:
Thanks for being patient with all these explanations, Bill, I am slowly starting to get it.
The thing is: with a single jack, will I be able to route the audio and the CV internally in two different paths?