Select between DCO1 or DCO2 will give you the same response as both
DCOs are exactly the same, no diference between them, as for noise
or external audio it can be done by converting the audio signal to DC,
check the expert sleepers AC enconder page for a simple circuit design
of a rectifier for converting AC audio to DC for CV control of the VCF.
Check it out: http://www.muffwiggler.com/forum/viewtopic.php?t=14328&highlight=voltage+doubler
Em 18/07/2011 22:15, 7yash < josh.nursing@... > escreveu:
DCOs are exactly the same, no diference between them, as for noise
or external audio it can be done by converting the audio signal to DC,
check the expert sleepers AC enconder page for a simple circuit design
of a rectifier for converting AC audio to DC for CV control of the VCF.
Check it out: http://www.muffwiggler.com/forum/viewtopic.php?t=14328&highlight=voltage+doubler
Em 18/07/2011 22:15, 7yash < josh.nursing@... > escreveu:
Nice. Can't wait to get the proper parts for these mods.
On circuitbenders.co.uk, they have a switchable source for the FM modulation: DCO1 or DCO2 or Noise or External Audio. That should be interesting to implement as well.