Korg Poly800/EX800 Users

Tim,

12 and 13 correspond to EG3 and inverted EG3.

It's not documented because I haven't finished the code yet although they both 
work.

You will notice that there are other parameters where you can select the LFO 
waveform and also have 12 and 13 available.

So you can modulate those features using EG3 instead of an LFO.

Enjoy!

Mike




________________________________
From: tim.tashpulatov <tim.tashpulatov@...>
To: korgpolyex@yahoogroups.com
Sent: Mon, November 22, 2010 4:27:42 PM
Subject: [korgpolyex] P1 14 parameter values 12 and 13

  
Hello all,

Now that I've assembled and installed the HAWK-800 kit, I am learing my renewed 
Poly-800.

When playing with P1 14 parameter (DCO harmonics modulation waveform selector) I 
can see there are two values, 12 and 13, not covered in the manual. I guess the 
manual is slightly out of sync with the latest firmware 2.4.6. What are these 
values?

The manual also says P1 45 can be 0-1, while it in fact can be 1-2, this must be 
just a typo.

Once again Mike, thanks a lot for the awesome work you have done with  HAWK-800 
and accompanying documentation.

Regards
Tim