Hello all, Now that I've assembled and installed the HAWK-800 kit, I am learing my renewed Poly-800. When playing with P1 14 parameter (DCO harmonics modulation waveform selector) I can see there are two values, 12 and 13, not covered in the manual. I guess the manual is slightly out of sync with the latest firmware 2.4.6. What are these values? The manual also says P1 45 can be 0-1, while it in fact can be 1-2, this must be just a typo. Once again Mike, thanks a lot for the awesome work you have done with HAWK-800 and accompanying documentation. Regards Tim
Message
P1 14 parameter values 12 and 13
2010-11-22 by tim.tashpulatov