Korg Poly800/EX800 Users

I had not intended to do that because the HAWK puts both resonance and FM-800 under MIDI CC control.

BUT, with the right smaller sized pots you could fit them on the front panel of 1RU.

So the answer is a yes.

Mike.




________________________________
From: Electrohead <electrohead2000@...>
To: "korgpolyex@yahoogroups.com" <korgpolyex@yahoogroups.com>
Sent: Wed, April 7, 2010 6:48:16 PM
Subject: Re: [korgpolyex] 1RU HAWK-800R PCB's have been ordered

  
Hi Mike. 
Will the unit have space for moog-slayer pots?
Sorry if you've already addresed that and I didn't see it. 
Thanks




On Apr 7, 2010, at 1:50 PM, "korgpolyex800" <korgpolyex800@ yahoo.com> wrote:


>
>
>
>  >
>
> 
>>      
> 
>Yesterday, I ordered ten of each of the display and keypad boards that will be used to create a 1RU version of the Poly-800.
>
>>The boards should be manufactured and delivered within three weeks.
>
>>I'll let you all know how they work out when they get here.
>
>>I ordered ten straight up and that will mean we'll have some available for the early adopters almost as soon as I get them.
>
>>Out of interest, how many owners would be interested in converting their Poly-800, MK1, MK2 or Ex-800 into a single 1RU unit?
>
>>The display will be a backlit LCD. All the buttons and pots will be on the front along with a head phone jack and power switch.
>
>>I could do the boards as a DIY kit that you then use to create your own rack unit (you source the rack box yourself and drill holes using a template). Or, I could do the whole rack unit as an entire end to end solution. That would probably end up being quite expensive.
>
>>So without worrying about that detail, how many of you would actually like to convert your Poly into a single rack unit if you could?
>
>>Mike.
>
>