EXCELLENT TIP. UNFORTUNATLY I HAVE THE OLDIE
Manuel Sáenz de Viteri M.
De: Michael Hawkins
Para: korgpolyex@yahoogroups.com
Enviado: vie, septiembre 11, 2009 4:06:02 PM
Asunto: Re: [korgpolyex] poly 800 won't hold program
Para: korgpolyex@yahoogroups.com
Enviado: vie, septiembre 11, 2009 4:06:02 PM
Asunto: Re: [korgpolyex] poly 800 won't hold program
If you have five C batteries in the Poly-800, then the patches should stay.
But, there is also a location on the main printed circuit board for installation of a lithium battery.
On some early main boards, there are no pads for the battery to install onto. But most boards do have the pads.
They're right smack in the middle of the main board. Check to see if there's a lithium battery soldered in there.
Mike.
But, there is also a location on the main printed circuit board for installation of a lithium battery.
On some early main boards, there are no pads for the battery to install onto. But most boards do have the pads.
They're right smack in the middle of the main board. Check to see if there's a lithium battery soldered in there.
Mike.
From: e_flat4me
To: korgpolyex@yahoogro ups.com
Sent: Friday, September 11, 2009 9:34:31 AM
Subject: [korgpolyex] poly 800 won't hold program
To: korgpolyex@yahoogro ups.com
Sent: Friday, September 11, 2009 9:34:31 AM
Subject: [korgpolyex] poly 800 won't hold program
is there a reason that my old poly-800 won't hold it's program.
it works fine, but, turn it off and everything is gone.
is there something hiding inside to look for.
thanx,
andy
¡Obtén la mejor experiencia en la web!
Descarga gratis el nuevo Internet Explorer 8
http://downloads.yahoo.com/ieak8/?l=e1