Korg Poly800/EX800 Users group photo

Yahoo Groups archive

Korg Poly800/EX800 Users

Index last updated: 2026-04-28 23:27 UTC

Message

Re: [korgpolyex] Accent envelope

2009-01-16 by Atom Smasher

On Fri, 16 Jan 2009, Michael Hawkins wrote:

> Yes, I just *knew* that you would be both smart enough and sharp enough 
> to work that out.
>
> The answer yes, it could be done. At the moment, I have just two 
> envelope "sets" but this could be expanded.
>
> Now what was it you were saying about not modding the HAWK-800 for more 
> flash?
>
> Because the limitation here is going to be the size of the code which is 
> bloating the more you keep talking! LOL
====================

is the limiting factor here the size of the code? or the size of the RAM? 
with the HAWK v1.3 how many envelopes could be precomputed and held in RAM 
(assuming the functionality is available to all EGs, but even then can we 
dynamically trade resolution for how many EGs respond to velocity)?

how thoroughly has the EG code been optimized? what if there's only one EG 
in the firmware, and ALL of the envelopes are precomputed? that might be a 
feasible RAM/ROM tradeoff...? it might even lighten the load if velocity 
isn't even used in a patch...?

damn... it's sure easy to come up with ideas when someone else is writing 
the code ;)


-- 
         ...atom

  ________________________
  http://atom.smasher.org/
  762A 3B98 A3C3 96C9 C6B7 582A B88D 52E4 D9F5 7808
  -------------------------------------------------

 	"I see in the near future a crisis approaching that unnerves
 	 me and causes me to tremble for the safety of my country...
 	 corporations have been enthroned and an era of corruption in
 	 high places will follow, and the money power of the country
 	 will endeavor to prolong its reign by working upon the
 	 prejudices of the people until all wealth is aggregated in a
 	 few hands and the Republic is destroyed."
 		-- U.S. President Abraham Lincoln, 21 Nov 1864

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.