Alex,
Once you install the HAWK-800 there is a new "Global" mode that has many new parameters for setting up MIDI and various global functions including joystick controls, omni on off, patch change enable, and many, many more.
I was referring to Global parameter 42.
You have an EX-800 without that HAWK-800. There is no such thing as a global mode in the original Poly-800 or EX-800.
Mike.
Once you install the HAWK-800 there is a new "Global" mode that has many new parameters for setting up MIDI and various global functions including joystick controls, omni on off, patch change enable, and many, many more.
I was referring to Global parameter 42.
You have an EX-800 without that HAWK-800. There is no such thing as a global mode in the original Poly-800 or EX-800.
Mike.
From: Alexandre Souza
To: korgpolyex@yahoogroups.com
Sent: Saturday, January 10, 2009 10:43:48 PM
Subject: Re: [korgpolyex] Joystick switching patches! WooHoo!
To: korgpolyex@yahoogroups.com
Sent: Saturday, January 10, 2009 10:43:48 PM
Subject: Re: [korgpolyex] Joystick switching patches! WooHoo!
> To use joystick parameter editing mode set global parameter 42 to either 2
> or 3.
> So the joystick modes (as set by global 42) are as follows:
> 0 = local joystick control off (sends MIDI if joystick MIDI TX channel is
> set using global 41 0=no MIDI TX, 1-16=channel) .
> 1 = local joystick control on.
> 2 = local joystick off and MIDI TX off. Parameter editing ON (allows
> editing globals, parameters and extended parameters).
> 3 = same as mode 2 except that in patch mode you can also use the joystick
> Y axis to select patches up (right) or down (left).
Hmm...the table is different on EX from Poly? My EX has ressonance (0 to
15) in 42...