--- In korgpolyex@y..., trip@b... wrote:
service manual, I've just been workin' off the schematics in the
files section.
I'm tempted to think that the pins labled "Level 1 & Level 2" (Pins 2
& 3) are the Log CV's for Osc1 & Osc2 VCA's respectivley.
I imagine "Pin9" (VCA LIN), is the Linear CV for the Noise Source,
maybe the Level + EG3 CV's are summed together into this Pin.
Pin 6 (VCA Log),is tied to ground. This at least, is the Log CV for
either the OSc1/Osc2 or Noise. So, thats one down at least.
Anyways,
Any thoughts
P9
>tempted
> I've been looking for this information myself for a while now. I'm
> say it simply does not exist at this point in time.Well, maybe if the info for the NJM2069 is included in the full
>
> Only one way to find out: are you feeling lucky?
service manual, I've just been workin' off the schematics in the
files section.
I'm tempted to think that the pins labled "Level 1 & Level 2" (Pins 2
& 3) are the Log CV's for Osc1 & Osc2 VCA's respectivley.
I imagine "Pin9" (VCA LIN), is the Linear CV for the Noise Source,
maybe the Level + EG3 CV's are summed together into this Pin.
Pin 6 (VCA Log),is tied to ground. This at least, is the Log CV for
either the OSc1/Osc2 or Noise. So, thats one down at least.
Anyways,
Any thoughts
P9