Korg Poly800/EX800 Users

Mike, 

Thats awesome!  I havent updated yet, but thats certainly what i
wanted...  i dont quite get the part about dividing/multiplying the
lfo cycle according to midi time code.  you will add a parameter to do
this on the fly?  BTW both LFOs were what i was talking about.

Sorry I have been very busy lately and havent been able to respond to
your question about what I have been doing lately with my ex.  I have
done a little tooling about with my doepfer schaltwerk midi step
sequencer, which can step write controller data as well as note
data(!)  It also has 8 channels of cv/gate output, so Ill eventually
hook up my Roland SH-101 and control both from it.

I am a big fan of your kit even though I might not be using it as much
as you would wish.  Ill keep you updated on the things i do.

JB


--- In korgpolyex@yahoogroups.com, "korgpolyex800" <korgpolyex800@...>
wrote:
>
> Yep, the feature is implemented.
> 
> You can enable either LFO1 or LFO2 oscillator sync'ed to MIDI time
> code or the onboard sequencer. There's no ability to change the number
> of ticks before advancing the oscillator. I haven't finished that
bit yet.
> 
> But I have uploaded the latest version of the firmware to my website
> and I've created a new folder in the files section of this group where
> I've dropped a SYSEX file for patch 11 which will demonstrate the
> feature nicely. All you have to do is (save your original patch 11
> first) send the sysex file to your Poly or EX800 and then play any
> sequence you feel like playing. See the speed of the onboard sequencer
> to exactly half way.
> 
> And enjoy the nice slow sweeping VCF.
> 
> To turn MIDI/seq LFO oscillator sync on and off use extended
> parameters 37 (LFO2) and 38 (LFO1). 0=off, 1=on.
> 
> Enjoy.
> 
> Mike.
>