Korg Poly800/EX800 Users

On Mon, 2 Jun 2008, korgpolyex800 wrote:

> So I was thinking about assigning controller 22 to be a parameter bank 
> select. Controller 22 would use a range of values from 0-16 (anything 
> above 16 would be ignored). Then Controllers 23 to 31 would be parameter 
> controllers for parameter 0 through 7.
...
> What does everyone think of that method?
===============

overall, it sounds great. for people who don't have a PC1600, might there 
be a way to use the display to show what group of parameters is 
selected... "En1", "LFO2", "OSC2", "FILTER", etc? i'm thinking it would be 
great if that flashed on the display for 2-3 seconds, or until a parameter 
is edited.

also, for people who don't have a PC1600, maybe CC22 should ignore the low 
bits; if i had to use my evolution (MK249c) to select 0-16 with a small 
knob that has a range of 0-127 it would kinda suck. ignoring the low bits 
(and using the high bits) would give better control in that situation. 
best of all would be adding a second CC to adjust the "edit bank" (or 
whatever you want to call it); one that works as you described (for 
software and PC1600's) and one that works as i described, for most 
hardware controllers.

i haven't gone over the rest of the math, but that's my biggest concern 
and it's not that big, since i have a PC1600x.


-- 
         ...atom

  ________________________
  http://atom.smasher.org/
  762A 3B98 A3C3 96C9 C6B7 582A B88D 52E4 D9F5 7808
  -------------------------------------------------

 	"Somebody has to take governments' place, and business
 	 seems to me to be a logical entity to do it."
 		-- David Rockefeller
 		Newsweek International, 1 Feb 1999.