how about a way to overdrive the vcf or vca? --- In korgpolyex@yahoogroups.com, "korgpolyex800" <korgpolyex800@...> wrote: > > Spent a bit more time on the FM-800 mod today. The effect only works > when you have high sustain set on the source DCO. I have used a > digital switch to allow selection of either DCO1 or DCO2 but it > doesn't work very well in Single DCO mode because it only modulates > the filter every second note. But we can change that so that an > extended parameter would determine if the source for the modulation > was automatically changed from one to the other DCO according to each > new note playing. Also, I noticed that with the digital pot set to > zero the signal from the DCO gets loaded down by the VCF so I will > have to buffer the signals with opamps before sending into the VCF. > > I am still a little bemused with the 12/24db/oct filter since it just > seems to set a lower cutoff and not much else. I would be interested > to hear from other people who have done the 12/24 filter mod to see > how they got best results. > > The moog slayer mod I did just bridged out the 10K resistor with > another 10K resistor (thus halving it to 5K). I didn't set up the > digital pot yet. The results are a little scary but workable. I > definitely think a digital pot is the way to go there. > > Will keep you all posted as I proceed. And do let me know how you're > all going and any suggestions are always welcome. > > Mike. > > --- In korgpolyex@yahoogroups.com, "patrioticduo" <patrioticduo@> > wrote: > > > > Yep today, I successfully built and installed the FM-800 mod with > > digital potentiometer control, the Moog Slayer and the 12/24 db filter > > selector. > > > > Initially testing was ear piercing squelches from the Moog Slayer. > > Wow, that self oscillation is a real speaker/ear killer. > > > > The 12/24 db switch I was not that impressed with. Why do people like > > it so much? > > > > The Fm-800 I have yet to test fully. Hopefully, will get to that over > > the next week or so. > > > > Mike. > > >
Message
Re: AtomaHawk prototype built and working
2008-05-21 by bys_jhn
Attachments
- No local attachments were found for this message.