Hi Marcin,
Since Yahoo has expanded the storage on our group to 100M bytes, you
could upload the file to the files section of our group.
Mike.
Since Yahoo has expanded the storage on our group to 100M bytes, you
could upload the file to the files section of our group.
Mike.
--- In korgpolyex@yahoogroups.com, "mr_shtootzky" <sztucki@...> wrote:
>
> Hi Narfman,
> So, here you are!
> I uploaded it to Rapidshare (thank you Marco Andreetta!). Perhaps not
> the most convenient, but free and without registration, so I could do
> it quickly.
> Here's the download link:
>
> http://rapidshare.com/files/24258106/Poly800II_manual.pdf.html
>
> I personally own Poly 800 MkI and got the instruction for MkII at
> some time only for comparison. Therefore I am not that familiar with
> it. But there's definitely more on MIDI implementation inside it. I
> hope it will help you though. And I wish you good luck with the
> restoration of your Poly MkII.
> Best regards
> Marcin
>
>
>
>
> --- In korgpolyex@yahoogroups.com, "narfman96" <narfman96@> wrote:
> >
> > Hi Marcin,
> >
> > Thanks for the quick reply and the offer! YouSendIt.com is the
> one
> > S-H I see most often. They've never hassled me after registering. I
> > don't think my Yahoo account allows more the 10 MB at a time. The
> > file area here is 100mb now if you wanted to post it in the files
> > section for a while and then take it down that would probably be
> cool
> > too. Is there a lot more to the manual than the first edition?
> >
> > Right now I've cleaned all the buttons and pots after
> disassembling
> > the whole synth. I cleaned and lubed the joystick thinking maybe
> > that is the source of the midi CC chatter. I replaced the corroded
> > (but not the board, whew!) battery with a nice gold contact holder
> > and fresh CR2032. Next all the keys need cleaning. 2 "F" keys are
> > not working and the "G4" key is snapped off but still works. Dust
> > Bunnies have been multiplying in the puppy for years for sure.
> >
> > Thanks again, Narfman
> >
> > --- In korgpolyex@yahoogroups.com, "mr_shtootzky" <sztucki@> wrote:
> > >
> > > I've got one in PDF. It's about 25 MB in size. I could try to
> send
> > it
> > > to you tomorrow via e-mail, if it gets through, or maybe upload
> it
> > to
> > > some sharing host. Any recommendations, by the way?
> > > Best regards.
> > > Marcin
> > >
> > > --- In korgpolyex@yahoogroups.com, "narfman96" <narfman96@> wrote:
> > > >
> > > > Hi,
> > > >
> > > > Does anyone know if there is a Poly-800 II manual? If so does
> > > > anyone have a PDF copy?
> > > >
> > > > I just picked up one that needs some work but I was able to
> get
> > a
> > > > really good bank of sounds from it using a combination of
> > Midiquest
> > > > 9.1 and Midi-Ox so I have the sysex. I can load the factory
> > presets
> > > > and 2 or 3 other banks I found using Midi-Ox. The synth sends
> > > > everything at once but my Midiman USB was up to the task. The
> > other
> > > > question I have is it sends random breath controller and
> > modulation
> > > > messages every 5 to 15 seconds. Is this normal? The values are
> 0
> > > but
> > > > it constantly sends them unless doing a sysex transfer. Also
> > > > Midiquest will not let me edit the banks because the parameters
> > are
> > > > the same for every patch. Even though if I load the bank back
> in
> > > all
> > > > the sounds are right. Weird!!! I e-mailed the MQ support guru
> on
> > > > this. Does this mean there isn't an editor for this great
> > synth?????
> > > >
> > > > Stay tuned I have to go to the hospital to see my new grandson!
> > > >
> > > > Thanks for any insight, Narfman
> > > >
> > >
> >
>