----- Original Message -----From: satnom2000Sent: Wednesday, March 28, 2007 12:24 PMSubject: [korgpolyex] Re: Mod questions--- In korgpolyex@yahoogroups.com, "marco_andreetta"
...> wrote:
>
> you can find the explanation here:
> http://cometalabs.blogspot.com/
>
> Audio Input:
> Drill a hole and add a "normally closed" jack. This will be your audio
> in jack. Desolder the + lead of cap C24 from the circuit board. Add a
> wire from the desoldered lead to the tip of the jack. Then, solder a
> wire from the empty hole where the cap used to be, to the normally
> closed lug of the jack. The final step is to solder a wire from the
> ground lug to a suitable ground spot on the pcb. Done!
Thank you very much Marco. Did you do this mod? Is it worth the
effort? Can you use all the paramaters to modulate or to shape the
sound that you input in the Poly?
Bernard
Message
Re: [korgpolyex] Re: Mod questions
2007-03-28 by David Mochen
Hi Satnom. As for the audio input, Marco's
explanation will do. I havent got here the exact link i follwoed (it was one old
post in this same NG). When I get home ill email it to you.
However, as regards 12/24, please check one of my
latest posts, since the post linked in Marco's page has a mistake that will
render the synth virtually mute AFAIK....
YOu'll find a diagram for 12/24 in my post. REal
easy.
G'luck,
DAve