Korg Poly800/EX800 Users

you can find the explanation here:
http://cometalabs.blogspot.com/

Audio Input:
Drill a hole and add a "normally closed" jack. This will be your audio 
in jack. Desolder the + lead of cap C24 from the circuit board. Add a 
wire from the desoldered lead to the tip of the jack. Then, solder a 
wire from the empty hole where the cap used to be, to the normally 
closed lug of the jack. The final step is to solder a wire from the 
ground lug to a suitable ground spot on the pcb. Done!



--- In korgpolyex@yahoogroups.com, "satnom2000" <satnomb@...> wrote:
>
> audio in to VCF (thru EG3)...
> 
> Hi David
> 
> I'm interested to know a little bit more about this audio in mod.  Do
> you have schematic or something that you can share with this group? 
> It will be much appreciated.
> 
> Thanks
> Bernard
>