Korg Poly800/EX800 Users

top work mike!!

I am following with interest your progress here, I had dreams of  
replacing my poly's parameter sticker with a fully functional dual 7  
segment display in each parameter box, and up/down switches to allow  
for more immediate tweaking and playing with a range of parameters at  
once.

having midi control over parameters may be a much simpler way to do  
this and much cheaper too!!

roll on the mods!

JB
On 16/02/2007, at 5:50 AM, Michael Hawkins wrote:

> here is the completed table of the parameters for each patch.  
> Patches start in the static RAM at location 2200h and use 21 bytes  
> (15h). So all 64 patches fit into the memory range from 2200h  
> through to 2740h. In the table below, the columns are bits within  
> each byte and the rows are byte numbers.
>
>
>
> Writing a patch editor for the EX800 is going to be a piece of cake.
>
> Mike H.
>
> Manu <g.manu@...> wrote:
> Great news :) Keep up the good work!
>
> Manu
>
> korgpolyex800 wrote:
> > Tuesday 6th February 2007 - Program Storage
> >
> > Finally, I've nailed down the precise location of program storage in
> > the EX800 RAM.
>
>
> Any questions? Get answers on any topic at Yahoo! Answers. Try it now.
>
> 
>
> 76543210
> 1XDCO2 wave sqr=0,tri=1XDCO1 wave sqr=0,tri=1DCO2 Octave (00-01-10) 
> DCO1 Octave (00-01-10)
> 2DCO2 2'DCO2 4'DCO2 8'DCO2 16'DCO1 2'DCO1 4'DCO1 8'DCO1 16'
> 3Chorus On=1, Off=0MODE Double=1, Single=0XXXXDetune 0-3
> 4Noise Level 0-15DCO Interval (0-12 decimal or 0-0Ch)
> 5DCO1 Level Bits 4,3,2VCF PolarityEG INT (0-15)
> 6XDCO2 Level Bits 0-31DCO1 Level Bits 0,1
> 7VCF Trig M=1, Single=0VCF Cutoff 00-63h (7 bits)
> 8MG Delay 0-15MG Frequency 0-15
> 9MG VCF Depth 0-15MG DCO Depth 0-15
> 10DEG1 Decay Bits 2,1,0DEG1 Attack 0-31
> 11DEG1 Slope Bit 0DEG1 Break Point 0-31DEG1 Decay Bits 5,4
> 12DEG1 Sustain Bits 3,2,1,0DEG1 Slope Bits 4,3,2,1
> 13DEG2 Attack Bits 1,0DEG1 Release Bits 4,3,2,1,0DEG1 Sustain Bit 4
> 14DEG2 Decay Bits 4,3,2,1,0DEG2 Attack Bits 4,3,2
> 15DEG2 Slope Bits 2,1,0DEG2 Break Point Bits 4,3,2,1,0
> 16DEG2 Release Bit 0DEG2 Sustain Bits 4,3,2,1,0DEG2 Slope Bits 4,3
> 17DEG3 Attack Bits 3,2,1,0DEG2 Release Bits 4,3,2,1
> 18DEG3 Break Point Bits 1,0DEG3 Decay Bits 4,3,2,1,0DEG3 Attack Bit 4
> 19DEG3 Slope Bits 4,3,2,1,0DEG3 Break Point Bits 4,3,2
> 20DEG3 Release Bits 2,1,0DEG3 Sustain 4,3,2,1,0
> 21VCF Keyboard Track 00-01-10VCF Resonance 0-15DEG3 Release Bits 4,3
>