Korg Poly800/EX800 Users

No, it's just square. That's why they're called DCO's.



--- In korgpolyex@yahoogroups.com, "jure zitnik" <kokoon@...> wrote:
>
> :D don't bother. what i meant was if it was possible for the MSM5232 to
> output something else apart from a set of square waves. maybe PWM?
> 
> jure
> 
> On 10/19/06, korgpolyex800 <korgpolyex800@...> wrote:
> >
> >   Jure,
> >
> > The foot outputs from the MSM5232 go straight into two sets of
> > resistor ladders that are individually selected such that you get to
> > choose between square or sawtooth (as per DCO1 and DCO2 parameter
> > settings).
> >
> > It would be conceivable to add further waveforms by adding additional
> > networks of resistor and capacitor ladder filters. However, to do this
> > would require yet another drop in retrofit board. It would have to
> > drop in where the NJM2069 and MSM5232 chips are. We would need some
> > additional chip select logic (quite doable). And then some additional
> > programming - of course.
> >
> > Although, you could probably achieve alternative waveforms with just
> > the drop in board and a couple of toggle switches to select the
> > alternative waveforms. I'll put a little thought into that over the
> > next couple of weeks.
> >
> > Very interesting but I have to tell you - you give someone an inch and
> > they take a mile. LOL's.
> >
> > Mike.
> >
> > --- In korgpolyex@yahoogroups.com <korgpolyex%40yahoogroups.com>,
> > "austeritygirlone" <ziggystar@>
> > wrote:
> > >
> > > --- In korgpolyex@yahoogroups.com
<korgpolyex%40yahoogroups.com>, "jure
> > zitnik" <kokoon@> wrote:
> > > >
> > > > what about alternative waveform options? the way it is now tells
> > me that
> > >
> > >
> > > How about throwing in some XORs?
> > >
> >
> >  
> >
>