greetings,
I 've opened up my Poly MKI just recently (one key went out) and found
on my suprise clearly marked place for battery. large symbol (sized
1:1) with two solder points at ends. i was thinking about placing a
backup batt earlier, had read that article in files section, but just
stopped thinking about it, until now. so, if there's anyone familiar
with the issue, i'd like to know are these solder points actual battery
hookup places (there's a mark + on one side of the symbol), or should I
stick to the procedure described in forementioned article ("+ to joint
of D1 and R1..." etc)?Message
on MKI battery...
2006-02-17 by ghostarbeiter