Ok thanks for the tip! I'll try ASAP. Otherwise I'll just replace it (somehow) :) --- In korgpolyex@yahoogroups.com, russ <russdaren@y...> wrote: > > Try using some of the Caig cleaning products. You can get them through Markertek and most other reputable electronics supply stores. Caig DeOxit is vary good at fixing problems like these. But only use it once for each potentiometer! Otherwise it may clean off the resitive element! > > synch71 <javajohan@h...> wrote: Hi all, > > I keep on having this problem with the volume knob. It does not work > properly, as the volume jumps randomly up or down, with scratching > noises as I turn it. Now having reached the point where the Poly- 800 > Mk1 hardly outputs any sound sometimes and the L and R channels drops > in and out. It seems like the pot is broken, and how do I fix this? > Perhaps I only need some clean spray or? > Suggestions needed to a big fan of the little magic Poly-800! > > Regards, > > Johan > > > > > > > SPONSORED LINKS > Sampler Electronic instrument Korg synthesizer Synthesizer Music synthesizers Synthesizer music > > --------------------------------- > YAHOO! GROUPS LINKS > > > Visit your group "korgpolyex" on the web. > > To unsubscribe from this group, send an email to: > korgpolyex-unsubscribe@yahoogroups.com > > Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. > > > --------------------------------- > > > > > > > --------------------------------- > Yahoo! for Good - Make a difference this year. >
Message
Re: Volume knob problem Mk1
2005-12-30 by synch71
Attachments
- No local attachments were found for this message.