Korg Poly800/EX800 Users

--- In korgpolyex@yahoogroups.com, "satnom2000" <satnomb@m...> wrote:
> 
> --- In korgpolyex@yahoogroups.com, "vvyoureyesvv" 
> <vvyoureyesvv@y...> wrote:
> > 
> > I just got a Korg Poly 800 today 
> 
> Congratulations!
> 
> > to manually put in all of the factory patches because I screwed 
it 
> > all up without learning about it. 
> 
> You can download the factory patches from this site.  It's a wav 
> file.  In order to load the bank in your Poly 800, you'll have to 
> transfert the data with an audio jack (1/8)connect from an audio 
> source (walkman, computer audio out) to the cassette connection 
> located at the rear of the keyboard.  You have to put the little 
> button to the enable position and send the audio signal (kind of a 
> fax tone).  Don't worry, it's not workimg very efficiently, you'll 
> have a lot of error message, it' because you have to set the level 
> proprely.  A couple of try and you'll succeed.
> 
> > Has anyone ever had to do this? If so, how do you save the 
presets 
> > so that they stay??
> > Everytime I program it, it will work for a little bit but as 
soon 
> as 
> > I go onto the next Program Number, the presets are gone from the 
> one 
> 
> It's because yo have to store your patches.  When you programm a 
> sound, you have to put the little button at the rear of the 
keyboard 
> (the one for the program) at the enable position, then you press 
the 
> store button and enter the number of the patch, and go back to the 
> rear and put the program button to the disable position.
> 
> Voilà!  Have fun.


Thank you for your response... I don't have a "Store" button 
anywhere on my keyboard though? I have a red button that 
says "Write" and then next to the numbers where you put in the 
program number there are little white words the 
say "save," "load," "verify," & "cancel" but I cant figure out how 
to select those??