Hey doods, I read on another forum that it's the first three WHITE keys that you're supposed to hold down. Don't know if it works because the low C on my K3 is dead anyway, but you might wanna try that. Let me know if it does the trick, huh? jb --- In kawaik3zone@yahoogroups.com, "jbrave" <onephatcat@e...> wrote: > You could try using a K3 editor to upload a set of the original sounds for the K3. I have them in Dr. T's format, if you install an Atari emulator (see http://tamw.atari-users.net/) on your Mac or PC, you can run Dr. T's editor, which lets you edit the user waveform as well. > > Joel > ----- Original Message ----- > From: suedehead705 > To: kawaik3zone@yahoogroups.com > Sent: Monday, March 15, 2004 2:33 PM > Subject: [kawaik3zone] reseting to original. > > > i recently purchased a k3 and ive been trying to figure out how to get > back to the original sounds. ive tried both methods ive read about, > being > > 1. holding down buttons 1 + 2 + 3 while turning the power on. > > and > > 2. holding down the three lowest keys while turning the power on. > > both have had no luck. can anyone help? > thanks. > > > > -------------------------------------------------------------------- ---------- > Yahoo! Groups Links > > a.. To visit your group on the web, go to: > http://groups.yahoo.com/group/kawaik3zone/ > > b.. To unsubscribe from this group, send an email to: > kawaik3zone-unsubscribe@yahoogroups.com > > c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Message
Re: reseting to original.
2004-03-20 by jboy917
Attachments
- No local attachments were found for this message.