K5synth

didobrain,
I ordered a pair of backlights yesterday (for my K5 and if my K2000
ever needs one.)  Have you put yours in the K5 yet?  Does it work?

--- In k5synth@yahoogroups.com, Antoine Deschênes <antdes45@n...> wrote:
> It's easy to slide, but you'll still need to take the LCD screen apart 
> to remove the old one and put this one(Removing the old one makes one 
> less load to the inverter).
> 
> Cthane1@a... a écrit:
> 
> > Yes, you can cut it in both the X and the Y direction on one side of
> > the strip.  I still have not opened my K5m to see if I can slide a
> > new backlight in easily.
> >
> > 
> >
> > --- In k5synth@yahoogroups.com, "nelsonj_sce" <nelsonj_sce@y...>
> > wrote:
> > > The nightlaunch site says the strips are 16 inches long.  Did you
> > just
> > > cut it to size? 
> > >
> > > --- In k5synth@yahoogroups.com, "didobrain2000" <Cthane1@a...>
> > wrote:
> > > > Fortunately for K5 users, the new backlight I installed in my
> > > > Kurzweil K2000 is designed for 9V battery that is stepped up to
> > 120V
> > > > 400hz!  Meaning it will work for both the K5 and the K2000.  I
> > know
> > > > this is a K5 users group, but I am so excited about this cheap
> > and
> > > > easy alternative for my K2000 that I MUST try it on the K5.  (My
> > > > Kawai K5000 backlight still works great.)  I am interested to see
> > if
> > > > you guys think it will be as easy to install on the K5 as it was
> > on
> > > > my Kurzweil.  The company I purchased this backlight from is
> > found at
> > > > WWW.nightlaunch.com   I used Pay Pal. Cool...  I will post the
> > > > pictures under the picture section.
> > > >
> > > > Didobrain
> >
> >
> > Yahoo! Groups Sponsor
> > ADVERTISEMENT
> >
<http://us.ard.yahoo.com/SIG=129v9tbmg/M=298184.5285298.6392945.3001176/D=g=
rplch/S=1705032144:HM/EXP=1093871297/A=2319498/R=0/SIG=11thfntfp/*http://www=
.netflix.com/Default?mqso=60185352&partid=5285298>

> >
> >
> >
> >
------------------------------------------------------------------------
> > Yahoo! Groups Links
> >
> >     * To visit your group on the web, go to:
> >       http://groups.yahoo.com/group/k5synth/
> >        
> >     * To unsubscribe from this group, send an email to:
> >       k5synth-unsubscribe@yahoogroups.com
> >       <mailto:k5synth-unsubscribe@yahoogroups.com?subject=Unsubscribe>
> >        
> >     * Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> >       Service <http://docs.yahoo.com/info/terms/>.
> >
> >
> 
> -- 
> 
> Antoine Deschênes /aka
>   -´¯`-¸-DragonMaster-¸-´¯`-
> http://thehotcom.deep-ice.com/
> Files: http://www.angelfire.com/ca7/hotcomcenter/