K5synth

There's a board before the transformer. Is there power in the socket the transformer plugs in?

Also, try to check for resistance in the wires from that socket to transformer in. You'll need to remove the tape around it.

Maybe Kawai(Not US one, they don't reply you) could sell you a transformer or tell you the specs of it.



"tuff_gnarl_69" <tuff_gnarl_69@...> wrote:

>Hi, its nicccck  , sorry to bother you again, ive already found the 
>problem. Its the transformer. The primary is open, so i had 220v on 
>the input, but no current was going thru it. I checked continuity, 
>and resistance but i couldnt measure any. So i came to the 
>conclusion that the primary is open. 
>Ive already checked the schematics, but in order to get a new 
>transformer i need to know the ac outputs. They arent specified on 
>the schematics .
>so if anyone is willing to help me ill keep checking my mail.
>
>thanx a lot ,
>sorry to bother yyou again really .
>bye
>nic
>
>


-- 
Antoine Desch\ufffdnes
aka DragonMaster
http://thehotcom.deep-ice.com/
Files:http://angelfire.com/ca7/hotcomcenter/


__________________________________________________________________
Switch to Netscape Internet Service.
As low as $9.95 a month -- Sign up today at http://isp.netscape.com/register

Netscape. Just the Net You Need.

New! Netscape Toolbar for Internet Explorer
Search from anywhere on the Web and block those annoying pop-ups.
Download now at http://channels.netscape.com/ns/search/install.jsp