Yahoo Groups archive
Archive for emulatorII-list.
Thread
2012-10-27 by Gil
There were some talks a while ago about the new Rev. F of Lotharec's floppy emulator. Has anyone installed it in their E-II ? Any impressions ? http://www.lotharek.pl/product.php?pid=42
2012-10-27 by w.niessen@gmx.de
Yes, me :-) I have it and its fine. The only problem is the Screwholes will not fit perfekt to a 3,5 to 5,25 Adapter Frame. He says he will fix these in a view Weeks. Am 27.10.2012 um 21:30 schrieb Gil: > There were some talks a while ago about the new Rev. F of Lotharec's > floppy emulator. Has anyone installed it in their E-II ? Any > impressions ? > > > http://www.lotharek.pl/product.php?pid=42 > > > > ------------------------------------ > > Yahoo! Groups Links > > >
2012-10-27 by Tyler Burns
2012-10-27 by Gil
What adapter did you use ? can you send a link ? ;) --- In emulatorII-list@yahoogroups.com, w.niessen@... wrote: > > Yes, me :-) > > I have it and its fine. The only problem is the Screwholes will not > fit perfekt to a 3,5 to 5,25 Adapter Frame. > He says he will fix these in a view Weeks. > > > Am 27.10.2012 um 21:30 schrieb Gil: > > > There were some talks a while ago about the new Rev. F of Lotharec's > > floppy emulator. Has anyone installed it in their E-II ? Any > > impressions ? > > > > > > http://www.lotharek.pl/product.php?pid=42 > > > > > > > > ------------------------------------ > > > > Yahoo! Groups Links > > > > > > >
2012-10-27 by w.niessen@gmx.de
3,5" to 5,25" Adapter http://www.delock.com/produkte/F_367_Einbaurahmen_18136/merkmale.html Am 27.10.2012 um 22:25 schrieb Gil: > What adapter did you use ? can you send a link ? ;) > > > > > --- In emulatorII-list@yahoogroups.com, w.niessen@... wrote: >> >> Yes, me :-) >> >> I have it and its fine. The only problem is the Screwholes will not >> fit perfekt to a 3,5 to 5,25 Adapter Frame. >> He says he will fix these in a view Weeks. >> >> >> Am 27.10.2012 um 21:30 schrieb Gil: >> >>> There were some talks a while ago about the new Rev. F of Lotharec's >>> floppy emulator. Has anyone installed it in their E-II ? Any >>> impressions ? >>> >>> >>> http://www.lotharek.pl/product.php?pid=42 >>> >>> >>> >>> ------------------------------------ >>> >>> Yahoo! Groups Links >>> >>> >>> >> > > > > > ------------------------------------ > > Yahoo! Groups Links > > >
2012-10-28 by dblondin@dblondin.com
I have it installed in the top drive bay of an EII with a switch that allows me to select between the two drives. The HxC is simple, convenient, and powerful. And the software works pretty good too - a little buggy but it's getting some good updates. Same problem here with the screw holes not lining up. Also the housing of the HxC is not threaded - actually it's too thin to be threaded. So the only way I could secure it to the drive bay adapter was to use self threading screws or small screws with nuts. I ended up drilling new holes in the drive adapter to fit the hole alignment of the HxC and also I used over-sized screws that seem to hold it securely in place. My first test - I found some EII banks on line and used the HxC software to batch convert them to the HxC format with just a couple of clicks. Dropped those files onto and SD card and in 5 minutes I've got this little SD card that's loaded with some wonderful Universe of Sounds banks and loads - I should say unlimited - room to spare. And no legacy computer gear or software needed to get the sounds installed. Screw hole problem aside I'm very happy with it. > 3,5" to 5,25" Adapter > http://www.delock.com/produkte/F_367_Einbaurahmen_18136/merkmale.html > > > Am 27.10.2012 um 22:25 schrieb Gil: > >> What adapter did you use ? can you send a link ? ;) >> >> >> >> >> --- In emulatorII-list@yahoogroups.com, w.niessen@... wrote: >>> >>> Yes, me :-) >>> >>> I have it and its fine. The only problem is the Screwholes will not >>> fit perfekt to a 3,5 to 5,25 Adapter Frame. >>> He says he will fix these in a view Weeks. >>> >>> >>> Am 27.10.2012 um 21:30 schrieb Gil: >>> >>>> There were some talks a while ago about the new Rev. F of Lotharec's >>>> floppy emulator. Has anyone installed it in their E-II ? Any >>>> impressions ? >>>> >>>> >>>> http://www.lotharek.pl/product.php?pid=42 >>>> >>>> >>>> >>>> ------------------------------------ >>>> >>>> Yahoo! Groups Links >>>> >>>> >>>> >>> >> >> >> >> >> ------------------------------------ >> >> Yahoo! Groups Links >> >> >> > >
2012-10-28 by w.niessen@gmx.de
Yes, my housing is also 1mm to big, but I fixit. I'm in contact with Lotharek (HxC) an as I told, he will fix it in a view Weeks. See my EII... http://groups.yahoo.com/group/emulatorII-list/photos/album/851025785/pic/1583755027/view?picmode=&mode=tn&order=ordinal&start=1&count=20&dir=asc Am 28.10.2012 um 03:34 schrieb dblondin@...: > I have it installed in the top drive bay of an EII with a switch that > allows me to select between the two drives. The HxC is simple, > convenient, > and powerful. And the software works pretty good too - a little > buggy but > it's getting some good updates. > > Same problem here with the screw holes not lining up. Also the > housing of > the HxC is not threaded - actually it's too thin to be threaded. So > the > only way I could secure it to the drive bay adapter was to use self > threading screws or small screws with nuts. I ended up drilling new > holes > in the drive adapter to fit the hole alignment of the HxC and also I > used > over-sized screws that seem to hold it securely in place. > > My first test - I found some EII banks on line and used the HxC > software > to batch convert them to the HxC format with just a couple of clicks. > Dropped those files onto and SD card and in 5 minutes I've got this > little > SD card that's loaded with some wonderful Universe of Sounds banks and > loads - I should say unlimited - room to spare. And no legacy computer > gear or software needed to get the sounds installed. > > Screw hole problem aside I'm very happy with it. > > >> 3,5" to 5,25" Adapter >> http://www.delock.com/produkte/F_367_Einbaurahmen_18136/merkmale.html >> >> >> Am 27.10.2012 um 22:25 schrieb Gil: >> >>> What adapter did you use ? can you send a link ? ;) >>> >>> >>> >>> >>> --- In emulatorII-list@yahoogroups.com, w.niessen@... wrote: >>>> >>>> Yes, me :-) >>>> >>>> I have it and its fine. The only problem is the Screwholes will not >>>> fit perfekt to a 3,5 to 5,25 Adapter Frame. >>>> He says he will fix these in a view Weeks. >>>> >>>> >>>> Am 27.10.2012 um 21:30 schrieb Gil: >>>> >>>>> There were some talks a while ago about the new Rev. F of >>>>> Lotharec's >>>>> floppy emulator. Has anyone installed it in their E-II ? Any >>>>> impressions ? >>>>> >>>>> >>>>> http://www.lotharek.pl/product.php?pid=42 >>>>> >>>>> >>>>> >>>>> ------------------------------------ >>>>> >>>>> Yahoo! Groups Links >>>>> >>>>> >>>>> >>>> >>> >>> >>> >>> >>> ------------------------------------ >>> >>> Yahoo! Groups Links >>> >>> >>> >> >> > > > > > ------------------------------------ > > Yahoo! Groups Links > > >
2012-10-28 by Gil
Very nice E-II, wniessen ! --- In emulatorII-list@yahoogroups.com, w.niessen@... wrote: > > Yes, my housing is also 1mm to big, but I fixit. > I'm in contact with Lotharek (HxC) an as I told, he will fix it in a > view Weeks. > > See my EII... > http://groups.yahoo.com/group/emulatorII-list/photos/album/851025785/pic/1583755027/view?picmode=&mode=tn&order=ordinal&start=1&count=20&dir=asc > > > Am 28.10.2012 um 03:34 schrieb dblondin@...: > > > I have it installed in the top drive bay of an EII with a switch that > > allows me to select between the two drives. The HxC is simple, > > convenient, > > and powerful. And the software works pretty good too - a little > > buggy but > > it's getting some good updates. > > > > Same problem here with the screw holes not lining up. Also the > > housing of > > the HxC is not threaded - actually it's too thin to be threaded. So > > the > > only way I could secure it to the drive bay adapter was to use self > > threading screws or small screws with nuts. I ended up drilling new > > holes > > in the drive adapter to fit the hole alignment of the HxC and also I > > used > > over-sized screws that seem to hold it securely in place. > > > > My first test - I found some EII banks on line and used the HxC > > software > > to batch convert them to the HxC format with just a couple of clicks. > > Dropped those files onto and SD card and in 5 minutes I've got this > > little > > SD card that's loaded with some wonderful Universe of Sounds banks and > > loads - I should say unlimited - room to spare. And no legacy computer > > gear or software needed to get the sounds installed. > > > > Screw hole problem aside I'm very happy with it. > > > > > >> 3,5" to 5,25" Adapter > >> http://www.delock.com/produkte/F_367_Einbaurahmen_18136/merkmale.html > >> > >> > >> Am 27.10.2012 um 22:25 schrieb Gil: > >> > >>> What adapter did you use ? can you send a link ? ;) > >>> > >>> > >>> > >>> > >>> --- In emulatorII-list@yahoogroups.com, w.niessen@ wrote: > >>>> > >>>> Yes, me :-) > >>>> > >>>> I have it and its fine. The only problem is the Screwholes will not > >>>> fit perfekt to a 3,5 to 5,25 Adapter Frame. > >>>> He says he will fix these in a view Weeks. > >>>> > >>>> > >>>> Am 27.10.2012 um 21:30 schrieb Gil: > >>>> > >>>>> There were some talks a while ago about the new Rev. F of > >>>>> Lotharec's > >>>>> floppy emulator. Has anyone installed it in their E-II ? Any > >>>>> impressions ? > >>>>> > >>>>> > >>>>> http://www.lotharek.pl/product.php?pid=42 > >>>>> > >>>>> > >>>>> > >>>>> ------------------------------------ > >>>>> > >>>>> Yahoo! Groups Links > >>>>> > >>>>> > >>>>> > >>>> > >>> > >>> > >>> > >>> > >>> ------------------------------------ > >>> > >>> Yahoo! Groups Links > >>> > >>> > >>> > >> > >> > > > > > > > > > > ------------------------------------ > > > > Yahoo! Groups Links > > > > > > >
2012-10-28 by pulsemod
I like how tight and simple looking the drive adapter looks. Here's the way I have it for the time being: http://www.dblondin.com/Pickup/e2.jpg --- In emulatorII-list@yahoogroups.com, "Gil" <gilwe@...> wrote: > > Very nice E-II, wniessen ! > > > > --- In emulatorII-list@yahoogroups.com, w.niessen@ wrote: > > > > Yes, my housing is also 1mm to big, but I fixit. > > I'm in contact with Lotharek (HxC) an as I told, he will fix it in a > > view Weeks. > > > > See my EII... > > http://groups.yahoo.com/group/emulatorII-list/photos/album/851025785/pic\ /1583755027/view?picmode=&mode=tn&order=ordinal&start=1&count=20&dir=asc > > > > > > Am 28.10.2012 um 03:34 schrieb dblondin@: > > > > > I have it installed in the top drive bay of an EII with a switch that > > > allows me to select between the two drives. The HxC is simple, > > > convenient, > > > and powerful. And the software works pretty good too - a little > > > buggy but > > > it's getting some good updates. > > > > > > Same problem here with the screw holes not lining up. Also the > > > housing of > > > the HxC is not threaded - actually it's too thin to be threaded. So > > > the > > > only way I could secure it to the drive bay adapter was to use self > > > threading screws or small screws with nuts. I ended up drilling new > > > holes > > > in the drive adapter to fit the hole alignment of the HxC and also I > > > used > > > over-sized screws that seem to hold it securely in place. > > > > > > My first test - I found some EII banks on line and used the HxC > > > software > > > to batch convert them to the HxC format with just a couple of clicks. > > > Dropped those files onto and SD card and in 5 minutes I've got this > > > little > > > SD card that's loaded with some wonderful Universe of Sounds banks and > > > loads - I should say unlimited - room to spare. And no legacy computer > > > gear or software needed to get the sounds installed. > > > > > > Screw hole problem aside I'm very happy with it. > > > > > > > > >> 3,5" to 5,25" Adapter > > >> http://www.delock.com/produkte/F_367_Einbaurahmen_18136/merkmale.html > > >> > > >> > > >> Am 27.10.2012 um 22:25 schrieb Gil: > > >> > > >>> What adapter did you use ? can you send a link ? ;) > > >>> > > >>> > > >>> > > >>> > > >>> --- In emulatorII-list@yahoogroups.com, w.niessen@ wrote: > > >>>> > > >>>> Yes, me :-) > > >>>> > > >>>> I have it and its fine. The only problem is the Screwholes will not > > >>>> fit perfekt to a 3,5 to 5,25 Adapter Frame. > > >>>> He says he will fix these in a view Weeks. > > >>>> > > >>>> > > >>>> Am 27.10.2012 um 21:30 schrieb Gil: > > >>>> > > >>>>> There were some talks a while ago about the new Rev. F of > > >>>>> Lotharec's > > >>>>> floppy emulator. Has anyone installed it in their E-II ? Any > > >>>>> impressions ? > > >>>>> > > >>>>> > > >>>>> http://www.lotharek.pl/product.php?pid=42 > > >>>>> > > >>>>> > > >>>>> > > >>>>> ------------------------------------ > > >>>>> > > >>>>> Yahoo! Groups Links > > >>>>> > > >>>>> > > >>>>> > > >>>> > > >>> > > >>> > > >>> > > >>> > > >>> ------------------------------------ > > >>> > > >>> Yahoo! Groups Links > > >>> > > >>> > > >>> > > >> > > >> > > > > > > > > > > > > > > > ------------------------------------ > > > > > > Yahoo! Groups Links > > > > > > > > > > > >
2012-10-29 by Gil
Which adapter did you use, pulsemod ? --- In emulatorII-list@yahoogroups.com, "pulsemod" <dblondin@...> wrote: > > > I like how tight and simple looking the drive adapter looks. Here's the > way I have it for the time being: > > http://www.dblondin.com/Pickup/e2.jpg > > --- In emulatorII-list@yahoogroups.com, "Gil" <gilwe@> wrote: > > > > Very nice E-II, wniessen ! > > > > > > > > --- In emulatorII-list@yahoogroups.com, w.niessen@ wrote: > > > > > > Yes, my housing is also 1mm to big, but I fixit. > > > I'm in contact with Lotharek (HxC) an as I told, he will fix it in a > > > view Weeks. > > > > > > See my EII... > > > > http://groups.yahoo.com/group/emulatorII-list/photos/album/851025785/pic\ > /1583755027/view?picmode=&mode=tn&order=ordinal&start=1&count=20&dir=asc > > > > > > > > > Am 28.10.2012 um 03:34 schrieb dblondin@: > > > > > > > I have it installed in the top drive bay of an EII with a switch > that > > > > allows me to select between the two drives. The HxC is simple, > > > > convenient, > > > > and powerful. And the software works pretty good too - a little > > > > buggy but > > > > it's getting some good updates. > > > > > > > > Same problem here with the screw holes not lining up. Also the > > > > housing of > > > > the HxC is not threaded - actually it's too thin to be threaded. > So > > > > the > > > > only way I could secure it to the drive bay adapter was to use > self > > > > threading screws or small screws with nuts. I ended up drilling > new > > > > holes > > > > in the drive adapter to fit the hole alignment of the HxC and also > I > > > > used > > > > over-sized screws that seem to hold it securely in place. > > > > > > > > My first test - I found some EII banks on line and used the HxC > > > > software > > > > to batch convert them to the HxC format with just a couple of > clicks. > > > > Dropped those files onto and SD card and in 5 minutes I've got > this > > > > little > > > > SD card that's loaded with some wonderful Universe of Sounds banks > and > > > > loads - I should say unlimited - room to spare. And no legacy > computer > > > > gear or software needed to get the sounds installed. > > > > > > > > Screw hole problem aside I'm very happy with it. > > > > > > > > > > > >> 3,5" to 5,25" Adapter > > > >> > http://www.delock.com/produkte/F_367_Einbaurahmen_18136/merkmale.html > > > >> > > > >> > > > >> Am 27.10.2012 um 22:25 schrieb Gil: > > > >> > > > >>> What adapter did you use ? can you send a link ? ;) > > > >>> > > > >>> > > > >>> > > > >>> > > > >>> --- In emulatorII-list@yahoogroups.com, w.niessen@ wrote: > > > >>>> > > > >>>> Yes, me :-) > > > >>>> > > > >>>> I have it and its fine. The only problem is the Screwholes will > not > > > >>>> fit perfekt to a 3,5 to 5,25 Adapter Frame. > > > >>>> He says he will fix these in a view Weeks. > > > >>>> > > > >>>> > > > >>>> Am 27.10.2012 um 21:30 schrieb Gil: > > > >>>> > > > >>>>> There were some talks a while ago about the new Rev. F of > > > >>>>> Lotharec's > > > >>>>> floppy emulator. Has anyone installed it in their E-II ? Any > > > >>>>> impressions ? > > > >>>>> > > > >>>>> > > > >>>>> http://www.lotharek.pl/product.php?pid=42 > > > >>>>> > > > >>>>> > > > >>>>> > > > >>>>> ------------------------------------ > > > >>>>> > > > >>>>> Yahoo! Groups Links > > > >>>>> > > > >>>>> > > > >>>>> > > > >>>> > > > >>> > > > >>> > > > >>> > > > >>> > > > >>> ------------------------------------ > > > >>> > > > >>> Yahoo! Groups Links > > > >>> > > > >>> > > > >>> > > > >> > > > >> > > > > > > > > > > > > > > > > > > > > ------------------------------------ > > > > > > > > Yahoo! Groups Links > > > > > > > > > > > > > > > > > >
2012-10-29 by dblondin@dblondin.com
This Old Synth located it while the EII was dropped off for a number of modifications, it's used so no way to know for sure. > Which adapter did you use, pulsemod ? > > > > > --- In emulatorII-list@yahoogroups.com, "pulsemod" <dblondin@...> wrote: >> >> >> I like how tight and simple looking the drive adapter looks. Here's the >> way I have it for the time being: >> >> http://www.dblondin.com/Pickup/e2.jpg >> >> --- In emulatorII-list@yahoogroups.com, "Gil" <gilwe@> wrote: >> > >> > Very nice E-II, wniessen ! >> > >> > >> > >> > --- In emulatorII-list@yahoogroups.com, w.niessen@ wrote: >> > > >> > > Yes, my housing is also 1mm to big, but I fixit. >> > > I'm in contact with Lotharek (HxC) an as I told, he will fix it in a >> > > view Weeks. >> > > >> > > See my EII... >> > > >> http://groups.yahoo.com/group/emulatorII-list/photos/album/851025785/pic\ >> /1583755027/view?picmode=&mode=tn&order=ordinal&start=1&count=20&dir=asc >> > > >> > > >> > > Am 28.10.2012 um 03:34 schrieb dblondin@: >> > > >> > > > I have it installed in the top drive bay of an EII with a switch >> that >> > > > allows me to select between the two drives. The HxC is simple, >> > > > convenient, >> > > > and powerful. And the software works pretty good too - a little >> > > > buggy but >> > > > it's getting some good updates. >> > > > >> > > > Same problem here with the screw holes not lining up. Also the >> > > > housing of >> > > > the HxC is not threaded - actually it's too thin to be threaded. >> So >> > > > the >> > > > only way I could secure it to the drive bay adapter was to use >> self >> > > > threading screws or small screws with nuts. I ended up drilling >> new >> > > > holes >> > > > in the drive adapter to fit the hole alignment of the HxC and also >> I >> > > > used >> > > > over-sized screws that seem to hold it securely in place. >> > > > >> > > > My first test - I found some EII banks on line and used the HxC >> > > > software >> > > > to batch convert them to the HxC format with just a couple of >> clicks. >> > > > Dropped those files onto and SD card and in 5 minutes I've got >> this >> > > > little >> > > > SD card that's loaded with some wonderful Universe of Sounds banks >> and >> > > > loads - I should say unlimited - room to spare. And no legacy >> computer >> > > > gear or software needed to get the sounds installed. >> > > > >> > > > Screw hole problem aside I'm very happy with it. >> > > > >> > > > >> > > >> 3,5" to 5,25" Adapter >> > > >> >> http://www.delock.com/produkte/F_367_Einbaurahmen_18136/merkmale.html >> > > >> >> > > >> >> > > >> Am 27.10.2012 um 22:25 schrieb Gil: >> > > >> >> > > >>> What adapter did you use ? can you send a link ? ;) >> > > >>> >> > > >>> >> > > >>> >> > > >>> >> > > >>> --- In emulatorII-list@yahoogroups.com, w.niessen@ wrote: >> > > >>>> >> > > >>>> Yes, me :-) >> > > >>>> >> > > >>>> I have it and its fine. The only problem is the Screwholes will >> not >> > > >>>> fit perfekt to a 3,5 to 5,25 Adapter Frame. >> > > >>>> He says he will fix these in a view Weeks. >> > > >>>> >> > > >>>> >> > > >>>> Am 27.10.2012 um 21:30 schrieb Gil: >> > > >>>> >> > > >>>>> There were some talks a while ago about the new Rev. F of >> > > >>>>> Lotharec's >> > > >>>>> floppy emulator. Has anyone installed it in their E-II ? Any >> > > >>>>> impressions ? >> > > >>>>> >> > > >>>>> >> > > >>>>> http://www.lotharek.pl/product.php?pid=42 >> > > >>>>> >> > > >>>>> >> > > >>>>> >> > > >>>>> ------------------------------------ >> > > >>>>> >> > > >>>>> Yahoo! Groups Links >> > > >>>>> >> > > >>>>> >> > > >>>>> >> > > >>>> >> > > >>> >> > > >>> >> > > >>> >> > > >>> >> > > >>> ------------------------------------ >> > > >>> >> > > >>> Yahoo! Groups Links >> > > >>> >> > > >>> >> > > >>> >> > > >> >> > > >> >> > > > >> > > > >> > > > >> > > > >> > > > ------------------------------------ >> > > > >> > > > Yahoo! Groups Links >> > > > >> > > > >> > > > >> > > >> > >> > > >