emulatorII-list

Hi, anyone have the specs to replace the inverter for the EII lcd?
If you can give me the Farnell order code, it would be awesone :)
Thank you all...

.kruz

Hi,
The standard LCD needs 100VAC, 400Hz.The inverter runs from 5VDC.

www.backlights.co.uk are using the Pactel 5 at ?14.99.
Farnell have a Pactel 5E for ?20. (549-125) - which has the right
specifications.

I have tried neither, as the inverter very very rarely fails. It's usually
the EL backlight or LCD itself that fails.

Regards
Rob
www.emulatorarchive.com

Hi, anyone have the specs to replace the inverter for the EII lcd?
If you can give me the Farnell order code, it would be awesone :)
Thank you all...



[Non-text portions of this message have been removed]

Hey there, 
 
Check this out. I stumbled upon it online one day.
 
http://members.aon.at/virtual-music/zonen_e/e_products_emu.htm#lcd
 
Hope it helps, 
ROOM 1202

Rob Keeble <rob@...> wrote:
Hi,
The standard LCD needs 100VAC, 400Hz.The inverter runs from 5VDC.

www.backlights.co.uk are using the Pactel 5 at ?14.99.
Farnell have a Pactel 5E for ?20. (549-125) - which has the right
specifications.

I have tried neither, as the inverter very very rarely fails. It's usually
the EL backlight or LCD itself that fails.

Regards
Rob
www.emulatorarchive.com

Hi, anyone have the specs to replace the inverter for the EII lcd?
If you can give me the Farnell order code, it would be awesone :)
Thank you all...



[Non-text portions of this message have been removed]


Yahoo! Groups SponsorADVERTISEMENT

To unsubscribe from this group, send an email to:
emulatorII-list-unsubscribe@yahoogroups.com



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 


---------------------------------
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software

[Non-text portions of this message have been removed]