emulatorII-list

I purchased a fixer upprer EII+ HD over the weekend. I spent abou 10 hrs+ trying to revive her, as she was dead when purchased. I got it to boot from the hard drive and load sound banks, but during tests I discovered that voices 4 and 5 are not working. I get sound on output 5 sometimes but it sounds strange. The sound on output 5 sometimes just loops endlessly until I keep pressing other keys to cancel it out. I tried swapping the SSM chip with a known good voice but it did not work.

My other issue ,which is bigger than the dead voices, is the sampling does not work. When I hit the sampling module button I get loud (75%+ on the VU Meter) metallic noise. I get noise regardless whether there is an input source or not. 

Any help or suggestions will be greatly appreciated. I wante to be in this club for the longest and here I am, like most trying to bring this baby up to its fullest potential.

Will

Hi.  Well, i don't know what to advice, i have about the same problems as you have, explained in my topic . But i wonder if you thought about some parts replacements, and if maybe you know where to get some ?
But it's difficult to identify the origin of a problem... Please tell me if you found some clues. Mine is allright , and after 5 minutes of use, the sounds get very wierd, not useable. I can't identify such problem. Is it about something getting hot , and not behaving nicely then  ?
I'll open mine and tell you if i have some clues or any thoughts.
Cheers, 
adrien 

--- In emulatorII-list@yahoogroups.com, "Wilson" <wgpena@...> wrote:
>
> I purchased a fixer upprer EII+ HD over the weekend. I spent abou 10 hrs+ trying to revive her, as she was dead when purchased. I got it to boot from the hard drive and load sound banks, but during tests I discovered that voices 4 and 5 are not working. I get sound on output 5 sometimes but it sounds strange. The sound on output 5 sometimes just loops endlessly until I keep pressing other keys to cancel it out. I tried swapping the SSM chip with a known good voice but it did not work.
> 
> My other issue ,which is bigger than the dead voices, is the sampling does not work. When I hit the sampling module button I get loud (75%+ on the VU Meter) metallic noise. I get noise regardless whether there is an input source or not. 
> 
> Any help or suggestions will be greatly appreciated. I wante to be in this club for the longest and here I am, like most trying to bring this baby up to its fullest potential.
> 
> Will
>

And please, what's a I purchased a fixer upprer EII+ HD  ? 
Where do you get this ? 

--- In emulatorII-list@yahoogroups.com, "Wilson" <wgpena@...> wrote:
>
> I purchased a fixer upprer EII+ HD over the weekend. I spent abou 10 hrs+ trying to revive her, as she was dead when purchased. I got it to boot from the hard drive and load sound banks, but during tests I discovered that voices 4 and 5 are not working. I get sound on output 5 sometimes but it sounds strange. The sound on output 5 sometimes just loops endlessly until I keep pressing other keys to cancel it out. I tried swapping the SSM chip with a known good voice but it did not work.
> 
> My other issue ,which is bigger than the dead voices, is the sampling does not work. When I hit the sampling module button I get loud (75%+ on the VU Meter) metallic noise. I get noise regardless whether there is an input source or not. 
> 
> Any help or suggestions will be greatly appreciated. I wante to be in this club for the longest and here I am, like most trying to bring this baby up to its fullest potential.
> 
> Will
>