emulatorII-list

Hi,

I have: 

EII Logic Board Rev 1.0 (scanner 3.1, main EPROM 2.1. OS 3.1) and Apple 
SE 1/40 running SD. My service people did all the required changes 
inside accordingly to the SD troubleshooting for Rev 1.0 including ther 
point Nr.3:

"If you do not have AT LEAST VERSION 2.3 of Emulator II OS software, 
then the following mod must be performed: Lift pin 22 of IC107 and 
solder one end of a 1Kohm 1/4watt 5% resistor to it. Solder the other 
end of the resistor to +5 volts DC anywhere nearby."

Unfortunately SD does not communicate with EII at all. 

Can this point 3 cause the problem with newer OS? 

I have another EII Rev 0.10 with added daughterboard. It is now broken 
(some voices did not play and now it does not boot). The cable and Mac 
worked OK with this second EII before.

Does anybody has any tips?

Tom