I will give that a try and let you know if it works.
==================================================
--- In emulatorII-list@yahoogroups.com, "hoschi1103" <totti@...> wrote:
>
> I've no EII at hand here on my job site, but if you start a diskcopy
> on EII and exchange the source os disk with a service disk when the
> display reads "start copy y/n" or whatever it was, it should copy the
> service disk to the new disk. If not, you can read the disk with the
> DIAG ROM into memory and write it back to an empty disk. I started
> some conceptual work on a new DIAG ROM which would support direct disk
> dump via serial using the z-protocol, but this will take a very long
> time as I'm always busy with other things and the current DIAG ROM is
> obviously mainly written from scratch, so needs some time to sort it
> out. Anyhow, after optimizing the code, there should be about 3k free
> for own extensions :-)
>
> Greetings,
> Hoschi
>
> --- In emulatorII-list@yahoogroups.com, "magmusic75" john-m-junk@
> wrote:
> >
> > I have an original EII Service manual with the original service
disk's
> > i would like to find a way to copy them beacuse these are super hard
to
> > find.
> > any info on this would be of great help.
> >
> > John
> >
>