emulatorII-list

Any Emulator I users in this group?

I think there is a few.. Well, Me anyway.
   
  Mike

umi4m <umi4m@...> wrote:
          Any Emulator I users in this group?



                         

       
---------------------------------
Get the name you always wanted with the new y7mail email address.

[Non-text portions of this message have been removed]

I guess I am – even though I haven’t received it yet – but I hopefully will
soon.

 

Kenneth Abildgaard

12bit.com

 

 

Fra: emulatorII-list@yahoogroups.com
[mailto:emulatorII-list@yahoogroups.com] På vegne af umi4m
Sendt: 10. februar 2008 21:36
Til: emulatorII-list@yahoogroups.com
Emne: [emulatorII-list] Any Emulator I users in this group?

 

Any Emulator I users in this group?

 



[Non-text portions of this message have been removed]

Here!

--- In emulatorII-list@yahoogroups.com, "umi4m" <umi4m@...> wrote:
>
> Any Emulator I users in this group?
>
hello!
i'm one of them!
i m searching for big sound??
i've got some
rv

Glad I'm not the only one.  Do you have the 8 or 4
Voice model? I just got a 4 voice and some of the
cables are unplugged from the mother board and I'm not
sure where they go. I was hoping someone could snap a
few pics of the connections.  There is a pic on the
Emulator archive site of a 8 voice, but it has a
different connections.

 
--- hvr128 <hvr128@...> wrote:

> --- In emulatorII-list@yahoogroups.com, "umi4m"
> <umi4m@...> wrote:
> >
> > Any Emulator I users in this group?
> >
> hello!
> i'm one of them!
> i m searching for big sound??
> i've got some
> rv
> 
> 



      ____________________________________________________________________________________
Never miss a thing.  Make Yahoo your home page. 
http://www.yahoo.com/r/hs

I have and use my EI quite a bit. 

Kevin Kelley


--- umi4m <umi4m@...> wrote:

> Any Emulator I users in this group?
> 
> 



      ____________________________________________________________________________________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile.  Try it now.  http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ

Interesting...have you all some of the original presets? Ever thought of making a backup of the original sounds simply recording the base samples on common digital audio format? I would be glad if I can listen to some orignal presets like Tympanis and percussions in general...
Thx for any support..
M
  ----- Original Message ----- 
  From: kevin kelley 
  To: emulatorII-list@yahoogroups.com 
  Sent: Tuesday, February 12, 2008 12:28 AM
  Subject: Re: [emulatorII-list] Any Emulator I users in this group?


  I have and use my EI quite a bit. 

  Kevin Kelley

  --- umi4m <umi4m@...> wrote:

  > Any Emulator I users in this group?
  > 
  > 

  __________________________________________________________
  Be a better friend, newshound, and 
  know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ 



   

[Non-text portions of this message have been removed]

Glad I'm not the only one. Do you have the 8 or 4
Voice model? I just got a 4 voice and some of the
cables are unplugged from the mother board and I'm not
sure where they go. I was hoping someone could snap a
few pics of the connections. There is a pic on the
Emulator archive site of a 8 voice, but it has a
different connections.
--- kevin kelley <xirin6@...> wrote:

> I have and use my EI quite a bit. 
> 
> Kevin Kelley
> 
> 
> --- umi4m <umi4m@...> wrote:
> 
> > Any Emulator I users in this group?
> > 
> > 
> 
> 
> 
>      
>
____________________________________________________________________________________
> Be a better friend, newshound, and 
> know-it-all with Yahoo! Mobile.  Try it now. 
>
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
> 
> 
> 



      ____________________________________________________________________________________
Looking for last minute shopping deals?  
Find them fast with Yahoo! Search.  http://tools.search.yahoo.com/newsearch/category.php?category=shopping

I bought mine in '91 without any disks.
Back in those days, E-Mu still was a company on their own feet, and
they gave me support, as they sent me all software that originally
came with the machine ( formatting, multisampling, sequencing,
manual....  ). 
The thing worked as I tested it, but it worked very very buggy. It's
an eight voice model. Unfortunately, I seem to have lost all my disks
for it... 

Anyway, I just got it because I'm a vintage E-Mu fanatic...

Greetings,
Elm.

Elm,

I had a similar type of encounter back in the early
90s, I bought this E1 from a group called Voice Farm,
it came with all their samples:).   It stopped working
one day so I drove it up to EMu systems to no far from
where I live. They put me in contact with Ed R. one of
the original designers and they fixed it no charge! 
Long story short, I sold that E1 a few years later,
always regretted it.  

I just now got a 4 voice,  with the disk drive
removed. I found a replacement drive but lack two
things:

1. The drive mounting bracket. I will have to make my
own and was hoping someone with a E1 could just send
me a pic  of how its mounted that would help me.

2. The replacement drive has some jumpers on it and I
was hoping someone with a working E1 could let me know
what jumper settings they have on their drive.

If I get mine working I could send you a few disks if
you still want them?

Thanks
G  




--- elmbeatz <elmbeatz@...> wrote:

> I bought mine in '91 without any disks.
> Back in those days, E-Mu still was a company on
> their own feet, and
> they gave me support, as they sent me all software
> that originally
> came with the machine ( formatting, multisampling,
> sequencing,
> manual....  ). 
> The thing worked as I tested it, but it worked very
> very buggy. It's
> an eight voice model. Unfortunately, I seem to have
> lost all my disks
> for it... 
> 
> Anyway, I just got it because I'm a vintage E-Mu
> fanatic...
> 
> Greetings,
> Elm.
> 
> 



      ____________________________________________________________________________________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile.  Try it now.  http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ

Hi G.

 

I guess you bought the one from Canada right ? I saw the Emulator with no
disk drive on eBay I remember.

It this the one you bought ?

 

Kenneth Abildgaard

12bit.com

 

Fra: emulatorII-list@yahoogroups.com
[mailto:emulatorII-list@yahoogroups.com] På vegne af GG
Sendt: 18. februar 2008 01:19
Til: emulatorII-list@yahoogroups.com
Emne: Re: [emulatorII-list] Re: Any Emulator I users in this group?

 

Elm,

I had a similar type of encounter back in the early
90s, I bought this E1 from a group called Voice Farm,
it came with all their samples:). It stopped working
one day so I drove it up to EMu systems to no far from
where I live. They put me in contact with Ed R. one of
the original designers and they fixed it no charge! 
Long story short, I sold that E1 a few years later,
always regretted it. 

I just now got a 4 voice, with the disk drive
removed. I found a replacement drive but lack two
things:

1. The drive mounting bracket. I will have to make my
own and was hoping someone with a E1 could just send
me a pic of how its mounted that would help me.

2. The replacement drive has some jumpers on it and I
was hoping someone with a working E1 could let me know
what jumper settings they have on their drive.

If I get mine working I could send you a few disks if
you still want them?

Thanks
G 

--- elmbeatz <elmbeatz@hotmail.com <mailto:elmbeatz%40hotmail.com> > wrote:

> I bought mine in '91 without any disks.
> Back in those days, E-Mu still was a company on
> their own feet, and
> they gave me support, as they sent me all software
> that originally
> came with the machine ( formatting, multisampling,
> sequencing,
> manual.... ). 
> The thing worked as I tested it, but it worked very
> very buggy. It's
> an eight voice model. Unfortunately, I seem to have
> lost all my disks
> for it... 
> 
> Anyway, I just got it because I'm a vintage E-Mu
> fanatic...
> 
> Greetings,
> Elm.
> 
> 

__________________________________________________________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile. Try it now.
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ 

 



[Non-text portions of this message have been removed]

I saw that one on ebay, too :)

Btw.:

My EI's casing ser.-No. is 001B (B for eight voice I guess). It's a
little strange, because it has many upgrades though..
So it cannot be the true 001, because it's got sequencer and a rev 3
(?)  board in it. Nevertheless, maybe stevie had let it upgraded and
later sold it?!  ;)

Greetings,
Elm.

Ha ha ..

 

Man – If that should be true you’d get a million USD for it on eBay J

 

Kenneth

 

Fra: emulatorII-list@yahoogroups.com
[mailto:emulatorII-list@yahoogroups.com] På vegne af elmbeatz
Sendt: 18. februar 2008 11:50
Til: emulatorII-list@yahoogroups.com
Emne: SV: [emulatorII-list] Re: Any Emulator I users in this group?

 

I saw that one on ebay, too :)

Btw.:

My EI's casing ser.-No. is 001B (B for eight voice I guess). It's a
little strange, because it has many upgrades though..
So it cannot be the true 001, because it's got sequencer and a rev 3
(?) board in it. Nevertheless, maybe stevie had let it upgraded and
later sold it?! ;)

Greetings,
Elm.

 



[Non-text portions of this message have been removed]

How funny, I've just stuck a refurbished Shugart 400L in my Emulator1.. so I went through the whole jumpers thing.. (I stuck the jumpers off my old drive into the old one.)
   
  This drive cost me $10 and worked perfectly!
   
  Looking at the drive front on, from the disk entry side..
   
  The IC mount with the jumpers is wired as follows
   
  Connector SIDE
   
  ------- this on is also (via a soldered wire)....
  -------
  -------
  -------
  -------
  ------- ....connected to this one!
  --   --
  
 
  DISK ENTRY SIDE
   
   
  Hope this Helps!
   
   
  Mike
   
   
  
GG <umi4m@...> wrote:
          Elm,

I had a similar type of encounter back in the early
90s, I bought this E1 from a group called Voice Farm,
it came with all their samples:). It stopped working
one day so I drove it up to EMu systems to no far from
where I live. They put me in contact with Ed R. one of
the original designers and they fixed it no charge! 
Long story short, I sold that E1 a few years later,
always regretted it. 

I just now got a 4 voice, with the disk drive
removed. I found a replacement drive but lack two
things:

1. The drive mounting bracket. I will have to make my
own and was hoping someone with a E1 could just send
me a pic of how its mounted that would help me.

2. The replacement drive has some jumpers on it and I
was hoping someone with a working E1 could let me know
what jumper settings they have on their drive.

If I get mine working I could send you a few disks if
you still want them?

Thanks
G 

--- elmbeatz <elmbeatz@...> wrote:

> I bought mine in '91 without any disks.
> Back in those days, E-Mu still was a company on
> their own feet, and
> they gave me support, as they sent me all software
> that originally
> came with the machine ( formatting, multisampling,
> sequencing,
> manual.... ). 
> The thing worked as I tested it, but it worked very
> very buggy. It's
> an eight voice model. Unfortunately, I seem to have
> lost all my disks
> for it... 
> 
> Anyway, I just got it because I'm a vintage E-Mu
> fanatic...
> 
> Greetings,
> Elm.
> 
> 

__________________________________________________________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ 



                         

       
---------------------------------
Get the name you always wanted with the new y7mail email address.

[Non-text portions of this message have been removed]

Hi G!

Take a look in the photos section.
I found a picture of my Drive mounting and posted it there. As well as
a picture of my serial plate.

Greetings,
Elm.

Hi
Most of the original 25 Emulators from 1981 (no sequencer, no VCA envelope)
were upgraded to the "Mark II". Certainly they all have envelopes as Dave
Rossum went round every user and replaced the boards.
Its very rare to see an Emulator I without sequencer but I did own one. I
would have thought Stevies/001B would have had all the upgrades possible,
except the JLC GenMod.
 
Beware early Emulators with the old OS EPROM, they struggle to be upward
compatible with OS diskette and sample libraries.  
 
Regards
Rob
www.emulatorarchive.com
 

.
 
<http://geo.yahoo.com/serv?s=97359714/grpId=2939306/grpspId=1705032144/msgId
=1413/stime=1203331773/nc1=3848627/nc2=4025304/nc3=5170405> 
 



[Non-text portions of this message have been removed]

Elm,

Hey thanks! That will save me allot of time and guess
work.  Looks like It's just a matter of getting the
right angle.

Regards,
G
--- elmbeatz <elmbeatz@...> wrote:

> Hi G!
> 
> Take a look in the photos section.
> I found a picture of my Drive mounting and posted it
> there. As well as
> a picture of my serial plate.
> 
> Greetings,
> Elm.
> 
> 



      ____________________________________________________________________________________
Never miss a thing.  Make Yahoo your home page. 
http://www.yahoo.com/r/hs

Yes, that was in fact  me 111 for the Emulator 150 to
ship.
--- Kenneth Abildgaard <kenneth@...> wrote:

> Hi G.
> 
>  
> 
> I guess you bought the one from Canada right ? I saw
> the Emulator with no
> disk drive on eBay I remember.
> 
> It this the one you bought ?
> 
>  
> 
> Kenneth Abildgaard
> 
> 12bit.com
> 
>  
> 
> Fra: emulatorII-list@yahoogroups.com
> [mailto:emulatorII-list@yahoogroups.com] P\ufffd vegne af
> GG
> Sendt: 18. februar 2008 01:19
> Til: emulatorII-list@yahoogroups.com
> Emne: Re: [emulatorII-list] Re: Any Emulator I users
> in this group?
> 
>  
> 
> Elm,
> 
> I had a similar type of encounter back in the early
> 90s, I bought this E1 from a group called Voice
> Farm,
> it came with all their samples:). It stopped working
> one day so I drove it up to EMu systems to no far
> from
> where I live. They put me in contact with Ed R. one
> of
> the original designers and they fixed it no charge! 
> Long story short, I sold that E1 a few years later,
> always regretted it. 
> 
> I just now got a 4 voice, with the disk drive
> removed. I found a replacement drive but lack two
> things:
> 
> 1. The drive mounting bracket. I will have to make
> my
> own and was hoping someone with a E1 could just send
> me a pic of how its mounted that would help me.
> 
> 2. The replacement drive has some jumpers on it and
> I
> was hoping someone with a working E1 could let me
> know
> what jumper settings they have on their drive.
> 
> If I get mine working I could send you a few disks
> if
> you still want them?
> 
> Thanks
> G 
> 
> --- elmbeatz <elmbeatz@...
> <mailto:elmbeatz%40hotmail.com> > wrote:
> 
> > I bought mine in '91 without any disks.
> > Back in those days, E-Mu still was a company on
> > their own feet, and
> > they gave me support, as they sent me all software
> > that originally
> > came with the machine ( formatting, multisampling,
> > sequencing,
> > manual.... ). 
> > The thing worked as I tested it, but it worked
> very
> > very buggy. It's
> > an eight voice model. Unfortunately, I seem to
> have
> > lost all my disks
> > for it... 
> > 
> > Anyway, I just got it because I'm a vintage E-Mu
> > fanatic...
> > 
> > Greetings,
> > Elm.
> > 
> > 
> 
>
__________________________________________________________
> Be a better friend, newshound, and 
> know-it-all with Yahoo! Mobile. Try it now.
>
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
> 
> 
>  
> 
> 
> 
> [Non-text portions of this message have been
> removed]
> 
> 



      ____________________________________________________________________________________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile.  Try it now.  http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ

Ha ha ..

 

Not bad.

 

Just got mine off eBay too for approx 400 USD in total including shipping to
Denmark.

Gonna pick it up tomorrow or the day after tomorrow..

 

KennethA

 

Fra: emulatorII-list@yahoogroups.com
[mailto:emulatorII-list@yahoogroups.com] På vegne af GG
Sendt: 18. februar 2008 17:48
Til: emulatorII-list@yahoogroups.com
Emne: Re: SV: [emulatorII-list] Re: Any Emulator I users in this group?

 

Yes, that was in fact me 111 for the Emulator 150 to
ship.
--- Kenneth Abildgaard <kenneth@... <mailto:kenneth%40oiio.dk> > wrote:

> Hi G.
> 
> 
> 
> I guess you bought the one from Canada right ? I saw
> the Emulator with no
> disk drive on eBay I remember.
> 
> It this the one you bought ?
> 
> 
> 
> Kenneth Abildgaard
> 
> 12bit.com
> 
> 
> 
> Fra: emulatorII-list@yahoogroups.com
<mailto:emulatorII-list%40yahoogroups.com> 
> [mailto:emulatorII-list@yahoogroups.com
<mailto:emulatorII-list%40yahoogroups.com> ] På vegne af
> GG
> Sendt: 18. februar 2008 01:19
> Til: emulatorII-list@yahoogroups.com
<mailto:emulatorII-list%40yahoogroups.com> 
> Emne: Re: [emulatorII-list] Re: Any Emulator I users
> in this group?
> 
> 
> 
> Elm,
> 
> I had a similar type of encounter back in the early
> 90s, I bought this E1 from a group called Voice
> Farm,
> it came with all their samples:). It stopped working
> one day so I drove it up to EMu systems to no far
> from
> where I live. They put me in contact with Ed R. one
> of
> the original designers and they fixed it no charge! 
> Long story short, I sold that E1 a few years later,
> always regretted it. 
> 
> I just now got a 4 voice, with the disk drive
> removed. I found a replacement drive but lack two
> things:
> 
> 1. The drive mounting bracket. I will have to make
> my
> own and was hoping someone with a E1 could just send
> me a pic of how its mounted that would help me.
> 
> 2. The replacement drive has some jumpers on it and
> I
> was hoping someone with a working E1 could let me
> know
> what jumper settings they have on their drive.
> 
> If I get mine working I could send you a few disks
> if
> you still want them?
> 
> Thanks
> G 
> 
> --- elmbeatz <elmbeatz@... <mailto:elmbeatz%40hotmail.com> 
> <mailto:elmbeatz%40hotmail.com> > wrote:
> 
> > I bought mine in '91 without any disks.
> > Back in those days, E-Mu still was a company on
> > their own feet, and
> > they gave me support, as they sent me all software
> > that originally
> > came with the machine ( formatting, multisampling,
> > sequencing,
> > manual.... ). 
> > The thing worked as I tested it, but it worked
> very
> > very buggy. It's
> > an eight voice model. Unfortunately, I seem to
> have
> > lost all my disks
> > for it... 
> > 
> > Anyway, I just got it because I'm a vintage E-Mu
> > fanatic...
> > 
> > Greetings,
> > Elm.
> > 
> > 
> 
>
__________________________________________________________
> Be a better friend, newshound, and 
> know-it-all with Yahoo! Mobile. Try it now.
>
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
> 
> 
> 
> 
> 
> 
> [Non-text portions of this message have been
> removed]
> 
> 

__________________________________________________________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile. Try it now.
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ 

 



[Non-text portions of this message have been removed]

Mike,

Yea, its a small world when it comes to Shugart disk
jumpering:)  

If this E1 decides to be too much of a basket case I
might preform an act of blasphemy.  I was thinking of
gutting it out and putting a EIII XP in there with a 4
octave MIDI controller and hooking up a few of the
panel buttons, and maybe putting the display in the
floppy holder or something like that.  I remember Ed
R. telling me that some guy used to have a gutted out
E1 that had been converted into a hibachi. I won't go
that route.

Thanks for the info.
G





--- Mike de Vries <mrjdevries@...> wrote:

> How funny, I've just stuck a refurbished Shugart
> 400L in my Emulator1.. so I went through the whole
> jumpers thing.. (I stuck the jumpers off my old
> drive into the old one.)
>    
>   This drive cost me $10 and worked perfectly!
>    
>   Looking at the drive front on, from the disk entry
> side..
>    
>   The IC mount with the jumpers is wired as follows
>    
>   Connector SIDE
>    
>   ------- this on is also (via a soldered wire)....
>   -------
>   -------
>   -------
>   -------
>   ------- ....connected to this one!
>   --   --
>   
>  
>   DISK ENTRY SIDE
>    
>    
>   Hope this Helps!
>    
>    
>   Mike
>    
>    
>   
> GG <umi4m@...> wrote:
>           Elm,
> 
> I had a similar type of encounter back in the early
> 90s, I bought this E1 from a group called Voice
> Farm,
> it came with all their samples:). It stopped working
> one day so I drove it up to EMu systems to no far
> from
> where I live. They put me in contact with Ed R. one
> of
> the original designers and they fixed it no charge! 
> Long story short, I sold that E1 a few years later,
> always regretted it. 
> 
> I just now got a 4 voice, with the disk drive
> removed. I found a replacement drive but lack two
> things:
> 
> 1. The drive mounting bracket. I will have to make
> my
> own and was hoping someone with a E1 could just send
> me a pic of how its mounted that would help me.
> 
> 2. The replacement drive has some jumpers on it and
> I
> was hoping someone with a working E1 could let me
> know
> what jumper settings they have on their drive.
> 
> If I get mine working I could send you a few disks
> if
> you still want them?
> 
> Thanks
> G 
> 
> --- elmbeatz <elmbeatz@...> wrote:
> 
> > I bought mine in '91 without any disks.
> > Back in those days, E-Mu still was a company on
> > their own feet, and
> > they gave me support, as they sent me all software
> > that originally
> > came with the machine ( formatting, multisampling,
> > sequencing,
> > manual.... ). 
> > The thing worked as I tested it, but it worked
> very
> > very buggy. It's
> > an eight voice model. Unfortunately, I seem to
> have
> > lost all my disks
> > for it... 
> > 
> > Anyway, I just got it because I'm a vintage E-Mu
> > fanatic...
> > 
> > Greetings,
> > Elm.
> > 
> > 
> 
>
__________________________________________________________
> Be a better friend, newshound, and 
> know-it-all with Yahoo! Mobile. Try it now.
>
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
> 
> 
> 
> 
>                          
> 
>        
> ---------------------------------
> Get the name you always wanted with the new y7mail
> email address.
> 
> [Non-text portions of this message have been
> removed]
> 
> 



      ____________________________________________________________________________________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile.  Try it now.  http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ

Think you got the better deal, 8V no missing parts.

--- Kenneth Abildgaard <kenneth@...> wrote:

> Ha ha ..
> 
>  
> 
> Not bad.
> 
>  
> 
> Just got mine off eBay too for approx 400 USD in
> total including shipping to
> Denmark.
> 
> Gonna pick it up tomorrow or the day after
> tomorrow..
> 
>  
> 
> KennethA
> 
>  
> 
> Fra: emulatorII-list@yahoogroups.com
> [mailto:emulatorII-list@yahoogroups.com] P\ufffd vegne af
> GG
> Sendt: 18. februar 2008 17:48
> Til: emulatorII-list@yahoogroups.com
> Emne: Re: SV: [emulatorII-list] Re: Any Emulator I
> users in this group?
> 
>  
> 
> Yes, that was in fact me 111 for the Emulator 150 to
> ship.
> --- Kenneth Abildgaard <kenneth@...
> <mailto:kenneth%40oiio.dk> > wrote:
> 
> > Hi G.
> > 
> > 
> > 
> > I guess you bought the one from Canada right ? I
> saw
> > the Emulator with no
> > disk drive on eBay I remember.
> > 
> > It this the one you bought ?
> > 
> > 
> > 
> > Kenneth Abildgaard
> > 
> > 12bit.com
> > 
> > 
> > 
> > Fra: emulatorII-list@yahoogroups.com
> <mailto:emulatorII-list%40yahoogroups.com> 
> > [mailto:emulatorII-list@yahoogroups.com
> <mailto:emulatorII-list%40yahoogroups.com> ] P\ufffd
> vegne af
> > GG
> > Sendt: 18. februar 2008 01:19
> > Til: emulatorII-list@yahoogroups.com
> <mailto:emulatorII-list%40yahoogroups.com> 
> > Emne: Re: [emulatorII-list] Re: Any Emulator I
> users
> > in this group?
> > 
> > 
> > 
> > Elm,
> > 
> > I had a similar type of encounter back in the
> early
> > 90s, I bought this E1 from a group called Voice
> > Farm,
> > it came with all their samples:). It stopped
> working
> > one day so I drove it up to EMu systems to no far
> > from
> > where I live. They put me in contact with Ed R.
> one
> > of
> > the original designers and they fixed it no
> charge! 
> > Long story short, I sold that E1 a few years
> later,
> > always regretted it. 
> > 
> > I just now got a 4 voice, with the disk drive
> > removed. I found a replacement drive but lack two
> > things:
> > 
> > 1. The drive mounting bracket. I will have to make
> > my
> > own and was hoping someone with a E1 could just
> send
> > me a pic of how its mounted that would help me.
> > 
> > 2. The replacement drive has some jumpers on it
> and
> > I
> > was hoping someone with a working E1 could let me
> > know
> > what jumper settings they have on their drive.
> > 
> > If I get mine working I could send you a few disks
> > if
> > you still want them?
> > 
> > Thanks
> > G 
> > 
> > --- elmbeatz <elmbeatz@...
> <mailto:elmbeatz%40hotmail.com> 
> > <mailto:elmbeatz%40hotmail.com> > wrote:
> > 
> > > I bought mine in '91 without any disks.
> > > Back in those days, E-Mu still was a company on
> > > their own feet, and
> > > they gave me support, as they sent me all
> software
> > > that originally
> > > came with the machine ( formatting,
> multisampling,
> > > sequencing,
> > > manual.... ). 
> > > The thing worked as I tested it, but it worked
> > very
> > > very buggy. It's
> > > an eight voice model. Unfortunately, I seem to
> > have
> > > lost all my disks
> > > for it... 
> > > 
> > > Anyway, I just got it because I'm a vintage E-Mu
> > > fanatic...
> > > 
> > > Greetings,
> > > Elm.
> > > 
> > > 
> > 
> >
>
__________________________________________________________
> > Be a better friend, newshound, and 
> > know-it-all with Yahoo! Mobile. Try it now.
> >
>
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
> > 
> > 
> > 
> > 
> > 
> > 
> > [Non-text portions of this message have been
> > removed]
> > 
> > 
> 
>
__________________________________________________________
> Be a better friend, newshound, and 
> know-it-all with Yahoo! Mobile. Try it now.
>
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
> 
> 
>  
> 
> 
> 
> [Non-text portions of this message have been
> removed]
> 
> 



      ____________________________________________________________________________________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile.  Try it now.  http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ

Ha ha, cool, I've had a similar idea...
I still got a raw EII casing (actually played once in Hamburg by Alan
Wilder), in which I wanted to put a usb midi controller some time
ago.. same Idea with floppy opening -> display..

Has anybody of you guys did such things before? 

greetings,
Elm

Elm,

Still trying to get this E1 to boot.  I added a few
pics of the jumpers on the two drives that I am trying
to get to work. Both are 400L models, not sure if
there is a SA-400L?  think the SA just stands for
Shugart Associates and isn't a different model. The
jumper block on your drive is all the way to the end
of the circuit board on mine its one IC in. At this
point there are a few things that might be bad as
well. The Boot PROM might be bad, the Z-80 SIO/2 might
be bad, and it might just be a set of bad floppies. 

Had a couple of questions if you don't mind?   If you
put an unformatted floppy in the drive, how does the
E1 react? Is the red LED on the drive supposed to come
on? It never does on mine, all you hear is the disk
spinning.  

All the LEDs on the E1 stay lit except for the
Sample/overload  and sometimes the swap turns off. Is
that an indicator of anything?

Thanks
G



--- elmbeatz <elmbeatz@...> wrote:

> Ha ha, cool, I've had a similar idea...
> I still got a raw EII casing (actually played once
> in Hamburg by Alan
> Wilder), in which I wanted to put a usb midi
> controller some time
> ago.. same Idea with floppy opening -> display..
> 
> Has anybody of you guys did such things before? 
> 
> greetings,
> Elm
> 
> 



      ____________________________________________________________________________________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile.  Try it now.  http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ

Mike,

Still trying to get this E1 working:).  I attached a
pic of what I understood should be the correct disk
drive jumper settings.  Is this the same as what you
have?  Now the LED comes on and if the drive is empty
it makes a noise like its doing a disk seek.
Unfortunately once I put a disk in the drive nothing
happens, all the LEDs stay lit thats about it. All the
disks that I have/bought are from a 8Voice model.  I
bet I need a set of disks specific to the 4Voice.





--- Mike de Vries <mrjdevries@...> wrote:

> How funny, I've just stuck a refurbished Shugart
> 400L in my Emulator1.. so I went through the whole
> jumpers thing.. (I stuck the jumpers off my old
> drive into the old one.)
>    
>   This drive cost me $10 and worked perfectly!
>    
>   Looking at the drive front on, from the disk entry
> side..
>    
>   The IC mount with the jumpers is wired as follows
>    
>   Connector SIDE
>    
>   ------- this on is also (via a soldered wire)....
>   -------
>   -------
>   -------
>   -------
>   ------- ....connected to this one!
>   --   --
>   
>  
>   DISK ENTRY SIDE
>    
>    
>   Hope this Helps!
>    
>    
>   Mike
>    
>    
>   
> GG <umi4m@...> wrote:
>           Elm,
> 
> I had a similar type of encounter back in the early
> 90s, I bought this E1 from a group called Voice
> Farm,
> it came with all their samples:). It stopped working
> one day so I drove it up to EMu systems to no far
> from
> where I live. They put me in contact with Ed R. one
> of
> the original designers and they fixed it no charge! 
> Long story short, I sold that E1 a few years later,
> always regretted it. 
> 
> I just now got a 4 voice, with the disk drive
> removed. I found a replacement drive but lack two
> things:
> 
> 1. The drive mounting bracket. I will have to make
> my
> own and was hoping someone with a E1 could just send
> me a pic of how its mounted that would help me.
> 
> 2. The replacement drive has some jumpers on it and
> I
> was hoping someone with a working E1 could let me
> know
> what jumper settings they have on their drive.
> 
> If I get mine working I could send you a few disks
> if
> you still want them?
> 
> Thanks
> G 
> 
> --- elmbeatz <elmbeatz@...> wrote:
> 
> > I bought mine in '91 without any disks.
> > Back in those days, E-Mu still was a company on
> > their own feet, and
> > they gave me support, as they sent me all software
> > that originally
> > came with the machine ( formatting, multisampling,
> > sequencing,
> > manual.... ). 
> > The thing worked as I tested it, but it worked
> very
> > very buggy. It's
> > an eight voice model. Unfortunately, I seem to
> have
> > lost all my disks
> > for it... 
> > 
> > Anyway, I just got it because I'm a vintage E-Mu
> > fanatic...
> > 
> > Greetings,
> > Elm.
> > 
> > 
> 
>
__________________________________________________________
> Be a better friend, newshound, and 
> know-it-all with Yahoo! Mobile. Try it now.
>
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
> 
> 
> 
> 
>                          
> 
>        
> ---------------------------------
> Get the name you always wanted with the new y7mail
> email address.
> 
> [Non-text portions of this message have been
> removed]
> 
> 



      ____________________________________________________________________________________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile.  Try it now.  http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ

[Non-text portions of this message have been removed]

No Pic attached.. Email me personally.
   
  I'm pretty sure the disks are the same for all models. 2, 4 and 8 voice.
   
  I'll take a snap of the inside of mine and see if that helps.
   
  Regards
   
  Mike

GG <umi4m@...> wrote:
          Mike,

Still trying to get this E1 working:). I attached a
pic of what I understood should be the correct disk
drive jumper settings. Is this the same as what you
have? Now the LED comes on and if the drive is empty
it makes a noise like its doing a disk seek.
Unfortunately once I put a disk in the drive nothing
happens, all the LEDs stay lit thats about it. All the
disks that I have/bought are from a 8Voice model. I
bet I need a set of disks specific to the 4Voice.

--- Mike de Vries <mrjdevries@...> wrote:

> How funny, I've just stuck a refurbished Shugart
> 400L in my Emulator1.. so I went through the whole
> jumpers thing.. (I stuck the jumpers off my old
> drive into the old one.)
> 
> This drive cost me $10 and worked perfectly!
> 
> Looking at the drive front on, from the disk entry
> side..
> 
> The IC mount with the jumpers is wired as follows
> 
> Connector SIDE
> 
> ------- this on is also (via a soldered wire)....
> -------
> -------
> -------
> -------
> ------- ....connected to this one!
> -- --
> 
> 
> DISK ENTRY SIDE
> 
> 
> Hope this Helps!
> 
> 
> Mike
> 
> 
> 
> GG <umi4m@...> wrote:
> Elm,
> 
> I had a similar type of encounter back in the early
> 90s, I bought this E1 from a group called Voice
> Farm,
> it came with all their samples:). It stopped working
> one day so I drove it up to EMu systems to no far
> from
> where I live. They put me in contact with Ed R. one
> of
> the original designers and they fixed it no charge! 
> Long story short, I sold that E1 a few years later,
> always regretted it. 
> 
> I just now got a 4 voice, with the disk drive
> removed. I found a replacement drive but lack two
> things:
> 
> 1. The drive mounting bracket. I will have to make
> my
> own and was hoping someone with a E1 could just send
> me a pic of how its mounted that would help me.
> 
> 2. The replacement drive has some jumpers on it and
> I
> was hoping someone with a working E1 could let me
> know
> what jumper settings they have on their drive.
> 
> If I get mine working I could send you a few disks
> if
> you still want them?
> 
> Thanks
> G 
> 
> --- elmbeatz <elmbeatz@...> wrote:
> 
> > I bought mine in '91 without any disks.
> > Back in those days, E-Mu still was a company on
> > their own feet, and
> > they gave me support, as they sent me all software
> > that originally
> > came with the machine ( formatting, multisampling,
> > sequencing,
> > manual.... ). 
> > The thing worked as I tested it, but it worked
> very
> > very buggy. It's
> > an eight voice model. Unfortunately, I seem to
> have
> > lost all my disks
> > for it... 
> > 
> > Anyway, I just got it because I'm a vintage E-Mu
> > fanatic...
> > 
> > Greetings,
> > Elm.
> > 
> > 
> 
>
__________________________________________________________
> Be a better friend, newshound, and 
> know-it-all with Yahoo! Mobile. Try it now.
>
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
> 
> 
> 
> 
> 
> 
> 
> ---------------------------------
> Get the name you always wanted with the new y7mail
> email address.
> 
> [Non-text portions of this message have been
> removed]
> 
> 

__________________________________________________________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ

[Non-text portions of this message have been removed]



                           

       
---------------------------------
Get the name you always wanted with the new y7mail email address.

[Non-text portions of this message have been removed]

What’s the ROM version of your Emulator ?

You can see it on the EPROM chip located on the top right side of the
sampler.

The ROM version will look something similar to this 810928.

If it’s an old ROM version it may be unable to read any samples made on
another Emulator – it sounds to me as if this is your problem.

 

I have the old 810928 version and cannot read floppies made on another
Emulator – but fortunately mine came with 369 floppies. 

 

But let me know what version it is – and I’ll let you know if this is your
problem.

 

Kenneth

12bit.com

 

Fra: emulatorII-list@yahoogroups.com
[mailto:emulatorII-list@yahoogroups.com] På vegne af Mike de Vries
Sendt: 20. april 2008 16:28
Til: emulatorII-list@yahoogroups.com
Emne: Re: [emulatorII-list] Re: Any Emulator I users in this group?

 

No Pic attached.. Email me personally.

I'm pretty sure the disks are the same for all models. 2, 4 and 8 voice.

I'll take a snap of the inside of mine and see if that helps.

Regards

Mike

GG <umi4m@... <mailto:umi4m%40yahoo.com> > wrote:
Mike,

Still trying to get this E1 working:). I attached a
pic of what I understood should be the correct disk
drive jumper settings. Is this the same as what you
have? Now the LED comes on and if the drive is empty
it makes a noise like its doing a disk seek.
Unfortunately once I put a disk in the drive nothing
happens, all the LEDs stay lit thats about it. All the
disks that I have/bought are from a 8Voice model. I
bet I need a set of disks specific to the 4Voice.

--- Mike de Vries <mrjdevries@yahoo.com.au
<mailto:mrjdevries%40yahoo.com.au> > wrote:

> How funny, I've just stuck a refurbished Shugart
> 400L in my Emulator1.. so I went through the whole
> jumpers thing.. (I stuck the jumpers off my old
> drive into the old one.)
> 
> This drive cost me $10 and worked perfectly!
> 
> Looking at the drive front on, from the disk entry
> side..
> 
> The IC mount with the jumpers is wired as follows
> 
> Connector SIDE
> 
> ------- this on is also (via a soldered wire)....
> -------
> -------
> -------
> -------
> ------- ....connected to this one!
> -- --
> 
> 
> DISK ENTRY SIDE
> 
> 
> Hope this Helps!
> 
> 
> Mike
> 
> 
> 
> GG <umi4m@... <mailto:umi4m%40yahoo.com> > wrote:
> Elm,
> 
> I had a similar type of encounter back in the early
> 90s, I bought this E1 from a group called Voice
> Farm,
> it came with all their samples:). It stopped working
> one day so I drove it up to EMu systems to no far
> from
> where I live. They put me in contact with Ed R. one
> of
> the original designers and they fixed it no charge! 
> Long story short, I sold that E1 a few years later,
> always regretted it. 
> 
> I just now got a 4 voice, with the disk drive
> removed. I found a replacement drive but lack two
> things:
> 
> 1. The drive mounting bracket. I will have to make
> my
> own and was hoping someone with a E1 could just send
> me a pic of how its mounted that would help me.
> 
> 2. The replacement drive has some jumpers on it and
> I
> was hoping someone with a working E1 could let me
> know
> what jumper settings they have on their drive.
> 
> If I get mine working I could send you a few disks
> if
> you still want them?
> 
> Thanks
> G 
> 
> --- elmbeatz <elmbeatz@... <mailto:elmbeatz%40hotmail.com> >
wrote:
> 
> > I bought mine in '91 without any disks.
> > Back in those days, E-Mu still was a company on
> > their own feet, and
> > they gave me support, as they sent me all software
> > that originally
> > came with the machine ( formatting, multisampling,
> > sequencing,
> > manual.... ). 
> > The thing worked as I tested it, but it worked
> very
> > very buggy. It's
> > an eight voice model. Unfortunately, I seem to
> have
> > lost all my disks
> > for it... 
> > 
> > Anyway, I just got it because I'm a vintage E-Mu
> > fanatic...
> > 
> > Greetings,
> > Elm.
> > 
> > 
> 
>
__________________________________________________________
> Be a better friend, newshound, and 
> know-it-all with Yahoo! Mobile. Try it now.
>
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
> 
> 
> 
> 
> 
> 
> 
> ---------------------------------
> Get the name you always wanted with the new y7mail
> email address.
> 
> [Non-text portions of this message have been
> removed]
> 
> 

__________________________________________________________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile. Try it now.
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ

[Non-text portions of this message have been removed]

---------------------------------
Get the name you always wanted with the new y7mail email address.

[Non-text portions of this message have been removed]

 



[Non-text portions of this message have been removed]

The version number of my 2708 EPROM is
820816.  

On Apr 20, 2008, at 9:42 AM, "Kenneth Abildgaard | OIIO" <kenneth@...> wrote:

What�s the ROM version of your Emulator ?

You can see it on the EPROM chip located on the top right side of the
sampler.

The ROM version will look something similar to this 810928.

If it�s an old ROM version it may be unable to read any samples made on
another Emulator � it sounds to me as if this is your problem.

I have the old 810928 version and cannot read floppies made on another
Emulator � but fortunately mine came with 369 floppies. 

But let me know what version it is � and I�ll let you know if this is your
problem.

Kenneth

12bit.com

Fra: emulatorII-list@yahoogroups.com
[mailto:emulatorII-list@yahoogroups.com] P� vegne af Mike de Vries
Sendt: 20. april 2008 16:28
Til: emulatorII-list@yahoogroups.com
Emne: Re: [emulatorII-list] Re: Any Emulator I users in this group?

No Pic attached.. Email me personally.

I'm pretty sure the disks are the same for all models. 2, 4 and 8 voice.

I'll take a snap of the inside of mine and see if that helps.

Regards

Mike

GG <umi4m@... <mailto:umi4m%40yahoo.com> > wrote:
Mike,

Still trying to get this E1 working:). I attached a
pic of what I understood should be the correct disk
drive jumper settings. Is this the same as what you
have? Now the LED comes on and if the drive is empty
it makes a noise like its doing a disk seek.
Unfortunately once I put a disk in the drive nothing
happens, all the LEDs stay lit thats about it. All the
disks that I have/bought are from a 8Voice model. I
bet I need a set of disks specific to the 4Voice.

--- Mike de Vries <mrjdevries@...
<mailto:mrjdevries%40yahoo.com.au> > wrote:

> How funny, I've just stuck a refurbished Shugart
> 400L in my Emulator1.. so I went through the whole
> jumpers thing.. (I stuck the jumpers off my old
> drive into the old one.)
> 
> This drive cost me $10 and worked perfectly!
> 
> Looking at the drive front on, from the disk entry
> side..
> 
> The IC mount with the jumpers is wired as follows
> 
> Connector SIDE
> 
> ------- this on is also (via a soldered wire)....
> -------
> -------
> -------
> -------
> ------- ....connected to this one!
> -- --
> 
> 
> DISK ENTRY SIDE
> 
> 
> Hope this Helps!
> 
> 
> Mike
> 
> 
> 
> GG <umi4m@... <mailto:umi4m%40yahoo.com> > wrote:
> Elm,
> 
> I had a similar type of encounter back in the early
> 90s, I bought this E1 from a group called Voice
> Farm,
> it came with all their samples:). It stopped working
> one day so I drove it up to EMu systems to no far
> from
> where I live. They put me in contact with Ed R. one
> of
> the original designers and they fixed it no charge! 
> Long story short, I sold that E1 a few years later,
> always regretted it. 
> 
> I just now got a 4 voice, with the disk drive
> removed. I found a replacement drive but lack two
> things:
> 
> 1. The drive mounting bracket. I will have to make
> my
> own and was hoping someone with a E1 could just send
> me a pic of how its mounted that would help me.
> 
> 2. The replacement drive has some jumpers on it and
> I
> was hoping someone with a working E1 could let me
> know
> what jumper settings they have on their drive.
> 
> If I get mine working I could send you a few disks
> if
> you still want them?
> 
> Thanks
> G 
> 
> --- elmbeatz <elmbeatz@... <mailto:elmbeatz%40hotmail.com> >
wrote:
> 
> > I bought mine in '91 without any disks.
> > Back in those days, E-Mu still was a company on
> > their own feet, and
> > they gave me support, as they sent me all software
> > that originally
> > came with the machine ( formatting, multisampling,
> > sequencing,
> > manual.... ). 
> > The thing worked as I tested it, but it worked
> very
> > very buggy. It's
> > an eight voice model. Unfortunately, I seem to
> have
> > lost all my disks
> > for it... 
> > 
> > Anyway, I just got it because I'm a vintage E-Mu
> > fanatic...
> > 
> > Greetings,
> > Elm.
> > 
> > 
> 
>
__________________________________________________________
> Be a better friend, newshound, and 
> know-it-all with Yahoo! Mobile. Try it now.
>
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
> 
> 
> 
> 
> 
> 
> 
> ---------------------------------
> Get the name you always wanted with the new y7mail
> email address.
> 
> [Non-text portions of this message have been
> removed]
> 
> 

__________________________________________________________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile. Try it now.
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ

[Non-text portions of this message have been removed]

---------------------------------
Get the name you always wanted with the new y7mail email address.

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]


 argin-bottom: 20px; padding: 0 8px; } #ygrp-sponsor .ad{ padding: 8px 0; } 	#ygrp-sponsor .ad #hd1{ font-family: Arial; font-weight: bold; color: #628c2a; font-size: 100%; line-height: 122%; } #ygrp-sponsor .ad a{ text-decoration: none; } #ygrp-sponsor .ad a:hover{ text-decoration: underline; } #ygrp-sponsor .ad p{ margin: 0; } o{font-size: 0; } .MsoNormal{ margin: 0 0 0 0; } #ygrp-text tt{ font-size: 120%; } blockquote{margin: 0 0 0 4px;} .replbq{margin:4} -->



      ____________________________________________________________________________________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile.  Try it now.  http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ

[Non-text portions of this message have been removed]

I

On Apr 20, 2008, at 9:42 AM, "Kenneth Abildgaard | OIIO" <kenneth@oiio.dk> wrote:

What�s the ROM version of your Emulator ?

You can see it on the EPROM chip located on the top right side of the
sampler.

The ROM version will look something similar to this 810928.

If it�s an old ROM version it may be unable to read any samples made on
another Emulator � it sounds to me as if this is your problem.

I have the old 810928 version and cannot read floppies made on another
Emulator � but fortunately mine came with 369 floppies. 

But let me know what version it is � and I�ll let you know if this is your
problem.

Kenneth

12bit.com

Fra: emulatorII-list@yahoogroups.com
[mailto:emulatorII-list@yahoogroups.com] P� vegne af Mike de Vries
Sendt: 20. april 2008 16:28
Til: emulatorII-list@yahoogroups.com
Emne: Re: [emulatorII-list] Re: Any Emulator I users in this group?

No Pic attached.. Email me personally.

I'm pretty sure the disks are the same for all models. 2, 4 and 8 voice.

I'll take a snap of the inside of mine and see if that helps.

Regards

Mike

GG <umi4m@... <mailto:umi4m%40yahoo.com> > wrote:
Mike,

Still trying to get this E1 working:). I attached a
pic of what I understood should be the correct disk
drive jumper settings. Is this the same as what you
have? Now the LED comes on and if the drive is empty
it makes a noise like its doing a disk seek.
Unfortunately once I put a disk in the drive nothing
happens, all the LEDs stay lit thats about it. All the
disks that I have/bought are from a 8Voice model. I
bet I need a set of disks specific to the 4Voice.

--- Mike de Vries <mrjdevries@yahoo.com.au
<mailto:mrjdevries%40yahoo.com.au> > wrote:

> How funny, I've just stuck a refurbished Shugart
> 400L in my Emulator1.. so I went through the whole
> jumpers thing.. (I stuck the jumpers off my old
> drive into the old one.)
> 
> This drive cost me $10 and worked perfectly!
> 
> Looking at the drive front on, from the disk entry
> side..
> 
> The IC mount with the jumpers is wired as follows
> 
> Connector SIDE
> 
> ------- this on is also (via a soldered wire)....
> -------
> -------
> -------
> -------
> ------- ....connected to this one!
> -- --
> 
> 
> DISK ENTRY SIDE
> 
> 
> Hope this Helps!
> 
> 
> Mike
> 
> 
> 
> GG <umi4m@... <mailto:umi4m%40yahoo.com> > wrote:
> Elm,
> 
> I had a similar type of encounter back in the early
> 90s, I bought this E1 from a group called Voice
> Farm,
> it came with all their samples:). It stopped working
> one day so I drove it up to EMu systems to no far
> from
> where I live. They put me in contact with Ed R. one
> of
> the original designers and they fixed it no charge! 
> Long story short, I sold that E1 a few years later,
> always regretted it. 
> 
> I just now got a 4 voice, with the disk drive
> removed. I found a replacement drive but lack two
> things:
> 
> 1. The drive mounting bracket. I will have to make
> my
> own and was hoping someone with a E1 could just send
> me a pic of how its mounted that would help me.
> 
> 2. The replacement drive has some jumpers on it and
> I
> was hoping someone with a working E1 could let me
> know
> what jumper settings they have on their drive.
> 
> If I get mine working I could send you a few disks
> if
> you still want them?
> 
> Thanks
> G 
> 
> --- elmbeatz <elmbeatz@... <mailto:elmbeatz%40hotmail.com> >
wrote:
> 
> > I bought mine in '91 without any disks.
> > Back in those days, E-Mu still was a company on
> > their own feet, and
> > they gave me support, as they sent me all software
> > that originally
> > came with the machine ( formatting, multisampling,
> > sequencing,
> > manual.... ). 
> > The thing worked as I tested it, but it worked
> very
> > very buggy. It's
> > an eight voice model. Unfortunately, I seem to
> have
> > lost all my disks
> > for it... 
> > 
> > Anyway, I just got it because I'm a vintage E-Mu
> > fanatic...
> > 
> > Greetings,
> > Elm.
> > 
> > 
> 
>
__________________________________________________________
> Be a better friend, newshound, and 
> know-it-all with Yahoo! Mobile. Try it now.
>
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
> 
> 
> 
> 
> 
> 
> 
> ---------------------------------
> Get the name you always wanted with the new y7mail
> email address.
> 
> [Non-text portions of this message have been
> removed]
> 
> 

__________________________________________________________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile. Try it now.
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ

[Non-text portions of this message have been removed]

---------------------------------
Get the name you always wanted with the new y7mail email address.

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]


 argin-bottom: 20px; padding: 0 8px; } #ygrp-sponsor .ad{ padding: 8px 0; } 	#ygrp-sponsor .ad #hd1{ font-family: Arial; font-weight: bold; color: #628c2a; font-size: 100%; line-height: 122%; } #ygrp-sponsor .ad a{ text-decoration: none; } #ygrp-sponsor .ad a:hover{ text-decoration: underline; } #ygrp-sponsor .ad p{ margin: 0; } o{font-size: 0; } .MsoNormal{ margin: 0 0 0 0; } #ygrp-text tt{ font-size: 120%; } blockquote{margin: 0 0 0 4px;} .replbq{margin:4} -->



      ____________________________________________________________________________________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile.  Try it now.  http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ

[Non-text portions of this message have been removed]

Hmm .. It's newer than mine then (the first two digits (82 and 81) is the
year.).

Have you tried with floppies from another Emulator ?
Where in the world are you located ?

Kenneth
12bit.com 

-----Oprindelig meddelelse-----
Fra: emulatorII-list@yahoogroups.com
[mailto:emulatorII-list@yahoogroups.com] På vegne af umi4m
Sendt: 20. april 2008 19:57
Til: emulatorII-list@yahoogroups.com
Emne: Re: SV: [emulatorII-list] Re: Any Emulator I users in this group?

The version number of my 2708 EPROM is
820816.  

On Apr 20, 2008, at 9:42 AM, "Kenneth Abildgaard | OIIO" <kenneth@...>
wrote:

What’s the ROM version of your Emulator ?

You can see it on the EPROM chip located on the top right side of the
sampler.

The ROM version will look something similar to this 810928.

If it’s an old ROM version it may be unable to read any samples made on
another Emulator – it sounds to me as if this is your problem.

I have the old 810928 version and cannot read floppies made on another
Emulator – but fortunately mine came with 369 floppies. 

But let me know what version it is – and I’ll let you know if this is your
problem.

Kenneth

12bit.com

Fra: emulatorII-list@yahoogroups.com
[mailto:emulatorII-list@yahoogroups.com] På vegne af Mike de Vries
Sendt: 20. april 2008 16:28
Til: emulatorII-list@yahoogroups.com
Emne: Re: [emulatorII-list] Re: Any Emulator I users in this group?

No Pic attached.. Email me personally.

I'm pretty sure the disks are the same for all models. 2, 4 and 8 voice.

I'll take a snap of the inside of mine and see if that helps.

Regards

Mike

GG <umi4m@... <mailto:umi4m%40yahoo.com> > wrote:
Mike,

Still trying to get this E1 working:). I attached a
pic of what I understood should be the correct disk
drive jumper settings. Is this the same as what you
have? Now the LED comes on and if the drive is empty
it makes a noise like its doing a disk seek.
Unfortunately once I put a disk in the drive nothing
happens, all the LEDs stay lit thats about it. All the
disks that I have/bought are from a 8Voice model. I
bet I need a set of disks specific to the 4Voice.

--- Mike de Vries <mrjdevries@...
<mailto:mrjdevries%40yahoo.com.au> > wrote:

> How funny, I've just stuck a refurbished Shugart
> 400L in my Emulator1.. so I went through the whole
> jumpers thing.. (I stuck the jumpers off my old
> drive into the old one.)
> 
> This drive cost me $10 and worked perfectly!
> 
> Looking at the drive front on, from the disk entry
> side..
> 
> The IC mount with the jumpers is wired as follows
> 
> Connector SIDE
> 
> ------- this on is also (via a soldered wire)....
> -------
> -------
> -------
> -------
> ------- ....connected to this one!
> -- --
> 
> 
> DISK ENTRY SIDE
> 
> 
> Hope this Helps!
> 
> 
> Mike
> 
> 
> 
> GG <umi4m@... <mailto:umi4m%40yahoo.com> > wrote:
> Elm,
> 
> I had a similar type of encounter back in the early
> 90s, I bought this E1 from a group called Voice
> Farm,
> it came with all their samples:). It stopped working
> one day so I drove it up to EMu systems to no far
> from
> where I live. They put me in contact with Ed R. one
> of
> the original designers and they fixed it no charge! 
> Long story short, I sold that E1 a few years later,
> always regretted it. 
> 
> I just now got a 4 voice, with the disk drive
> removed. I found a replacement drive but lack two
> things:
> 
> 1. The drive mounting bracket. I will have to make
> my
> own and was hoping someone with a E1 could just send
> me a pic of how its mounted that would help me.
> 
> 2. The replacement drive has some jumpers on it and
> I
> was hoping someone with a working E1 could let me
> know
> what jumper settings they have on their drive.
> 
> If I get mine working I could send you a few disks
> if
> you still want them?
> 
> Thanks
> G 
> 
> --- elmbeatz <elmbeatz@... <mailto:elmbeatz%40hotmail.com> >
wrote:
> 
> > I bought mine in '91 without any disks.
> > Back in those days, E-Mu still was a company on
> > their own feet, and
> > they gave me support, as they sent me all software
> > that originally
> > came with the machine ( formatting, multisampling,
> > sequencing,
> > manual.... ). 
> > The thing worked as I tested it, but it worked
> very
> > very buggy. It's
> > an eight voice model. Unfortunately, I seem to
> have
> > lost all my disks
> > for it... 
> > 
> > Anyway, I just got it because I'm a vintage E-Mu
> > fanatic...
> > 
> > Greetings,
> > Elm.
> > 
> > 
> 
>
__________________________________________________________
> Be a better friend, newshound, and 
> know-it-all with Yahoo! Mobile. Try it now.
>
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
> 
> 
> 
> 
> 
> 
> 
> ---------------------------------
> Get the name you always wanted with the new y7mail
> email address.
> 
> [Non-text portions of this message have been
> removed]
> 
> 

__________________________________________________________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile. Try it now.
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ

[Non-text portions of this message have been removed]

---------------------------------
Get the name you always wanted with the new y7mail email address.

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]


 argin-bottom: 20px; padding: 0 8px; } #ygrp-sponsor .ad{ padding: 8px 0; }
#ygrp-sponsor .ad #hd1{ font-family: Arial; font-weight: bold; color:
#628c2a; font-size: 100%; line-height: 122%; } #ygrp-sponsor .ad a{
text-decoration: none; } #ygrp-sponsor .ad a:hover{ text-decoration:
underline; } #ygrp-sponsor .ad p{ margin: 0; } o{font-size: 0; } .MsoNormal{
margin: 0 0 0 0; } #ygrp-text tt{ font-size: 120%; } blockquote{margin: 0 0
0 4px;} .replbq{margin:4} -->



 
____________________________________________________________________________
________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile.  Try it now.
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ

[Non-text portions of this message have been removed]


------------------------------------

Yahoo! Groups Links

Same here, 820816
   
  Regards
   
  Mike

umi4m <umi4m@...> wrote:
  The version number of my 2708 EPROM is
820816. 

On Apr 20, 2008, at 9:42 AM, "Kenneth Abildgaard | OIIO" wrote:

What’s the ROM version of your Emulator ?

You can see it on the EPROM chip located on the top right side of the
sampler.

The ROM version will look something similar to this 810928.

If it’s an old ROM version it may be unable to read any samples made on
another Emulator – it sounds to me as if this is your problem.

I have the old 810928 version and cannot read floppies made on another
Emulator – but fortunately mine came with 369 floppies. 

But let me know what version it is – and I’ll let you know if this is your
problem.

Kenneth

12bit.com

Fra: emulatorII-list@yahoogroups.com
[mailto:emulatorII-list@yahoogroups.com] På vegne af Mike de Vries
Sendt: 20. april 2008 16:28
Til: emulatorII-list@yahoogroups.com
Emne: Re: [emulatorII-list] Re: Any Emulator I users in this group?

No Pic attached.. Email me personally.

I'm pretty sure the disks are the same for all models. 2, 4 and 8 voice.

I'll take a snap of the inside of mine and see if that helps.

Regards

Mike

GG > wrote:
Mike,

Still trying to get this E1 working:). I attached a
pic of what I understood should be the correct disk
drive jumper settings. Is this the same as what you
have? Now the LED comes on and if the drive is empty
it makes a noise like its doing a disk seek.
Unfortunately once I put a disk in the drive nothing
happens, all the LEDs stay lit thats about it. All the
disks that I have/bought are from a 8Voice model. I
bet I need a set of disks specific to the 4Voice.

--- Mike de Vries > wrote:

> How funny, I've just stuck a refurbished Shugart
> 400L in my Emulator1.. so I went through the whole
> jumpers thing.. (I stuck the jumpers off my old
> drive into the old one.)
> 
> This drive cost me $10 and worked perfectly!
> 
> Looking at the drive front on, from the disk entry
> side..
> 
> The IC mount with the jumpers is wired as follows
> 
> Connector SIDE
> 
> ------- this on is also (via a soldered wire)....
> -------
> -------
> -------
> -------
> ------- ....connected to this one!
> -- --
> 
> 
> DISK ENTRY SIDE
> 
> 
> Hope this Helps!
> 
> 
> Mike
> 
> 
> 
> GG > wrote:
> Elm,
> 
> I had a similar type of encounter back in the early
> 90s, I bought this E1 from a group called Voice
> Farm,
> it came with all their samples:). It stopped working
> one day so I drove it up to EMu systems to no far
> from
> where I live. They put me in contact with Ed R. one
> of
> the original designers and they fixed it no charge! 
> Long story short, I sold that E1 a few years later,
> always regretted it. 
> 
> I just now got a 4 voice, with the disk drive
> removed. I found a replacement drive but lack two
> things:
> 
> 1. The drive mounting bracket. I will have to make
> my
> own and was hoping someone with a E1 could just send
> me a pic of how its mounted that would help me.
> 
> 2. The replacement drive has some jumpers on it and
> I
> was hoping someone with a working E1 could let me
> know
> what jumper settings they have on their drive.
> 
> If I get mine working I could send you a few disks
> if
> you still want them?
> 
> Thanks
> G 
> 
> --- elmbeatz >
wrote:
> 
> > I bought mine in '91 without any disks.
> > Back in those days, E-Mu still was a company on
> > their own feet, and
> > they gave me support, as they sent me all software
> > that originally
> > came with the machine ( formatting, multisampling,
> > sequencing,
> > manual.... ). 
> > The thing worked as I tested it, but it worked
> very
> > very buggy. It's
> > an eight voice model. Unfortunately, I seem to
> have
> > lost all my disks
> > for it... 
> > 
> > Anyway, I just got it because I'm a vintage E-Mu
> > fanatic...
> > 
> > Greetings,
> > Elm.
> > 
> > 
> 
>
__________________________________________________________
> Be a better friend, newshound, and 
> know-it-all with Yahoo! Mobile. Try it now.
>
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
> 
> 
> 
> 
> 
> 
> 
> ---------------------------------
> Get the name you always wanted with the new y7mail
> email address.
> 
> [Non-text portions of this message have been
> removed]
> 
> 

__________________________________________________________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile. Try it now.
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ

[Non-text portions of this message have been removed]

---------------------------------
Get the name you always wanted with the new y7mail email address.

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]


argin-bottom: 20px; padding: 0 8px; } #ygrp-sponsor .ad{ padding: 8px 0; } #ygrp-sponsor .ad #hd1{ font-family: Arial; font-weight: bold; color: #628c2a; font-size: 100%; line-height: 122%; } #ygrp-sponsor .ad a{ text-decoration: none; } #ygrp-sponsor .ad a:hover{ text-decoration: underline; } #ygrp-sponsor .ad p{ margin: 0; } o{font-size: 0; } .MsoNormal{ margin: 0 0 0 0; } #ygrp-text tt{ font-size: 120%; } blockquote{margin: 0 0 0 4px;} .replbq{margin:4} -->



____________________________________________________________________________________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ

[Non-text portions of this message have been removed]


------------------------------------

Yahoo! Groups Links





       
---------------------------------
Get the name you always wanted with the new y7mail email address.

[Non-text portions of this message have been removed]