Yahoo Groups archive

emulatorII-list

Archive for emulatorII-list.

Index last updated: 2026-03-30 01:09 UTC

Thread

SDII communication problem on a PowerPC 4400/200

SDII communication problem on a PowerPC 4400/200

2008-02-04 by brian_ronn

Hi fellow EII users

I've installed OS8.0 on a PowerPC 4400/200 and I have tried to make 
the PowerPC communicate with the EII. Unfortunately without any luck.

I've tried with apletalk active for the printer and modem and in the 
inactive mode. Disk cache is permanently on, ram disk on and off and 
virtuel memory on and off too without success.

I have a PowerMac 7500/100 with OS 8.0 which communicate well with 
the EII with the same cable. The PowerMac is working with ApleTalk 
active, disk cache on, virtuel memory on and ram disk on but this 
doesn't seem to work with the PowerPC.

According to emulatorarchive the PowerPC should work too, but how. 
Does any of you know how?

Best regards

Brian
Denmark

SV: [emulatorII-list] SDII communication problem on a PowerPC 4400/200

2008-02-05 by Marko Laukka

Have you checked that MIDI is enabled and set to channel 1 on EII? If you have any MIDI cables attached pull them off from EII, that should do the trick.
   
  /Marko

brian_ronn <brian_ronn@...> skrev:
          Hi fellow EII users

I've installed OS8.0 on a PowerPC 4400/200 and I have tried to make 
the PowerPC communicate with the EII. Unfortunately without any luck.

I've tried with apletalk active for the printer and modem and in the 
inactive mode. Disk cache is permanently on, ram disk on and off and 
virtuel memory on and off too without success.

I have a PowerMac 7500/100 with OS 8.0 which communicate well with 
the EII with the same cable. The PowerMac is working with ApleTalk 
active, disk cache on, virtuel memory on and ram disk on but this 
doesn't seem to work with the PowerPC.

According to emulatorarchive the PowerPC should work too, but how. 
Does any of you know how?

Best regards

Brian
Denmark 



                         

       
---------------------------------
Ta semester! - sök efter resor hos Yahoo! Shopping. 
Jämför pris på flygbiljetter och hotellrum: http://shopping.yahoo.se/c-169901-resor-biljetter.html

[Non-text portions of this message have been removed]

SV: [emulatorII-list] SDII communication problem on a PowerPC 4400/200

2008-02-05 by Brian Ronn

Hi Marko
   
  Thank you for your advice.
   
  I have a midicable connected but the midipatch bay is turned off, so the midi causes no problem. When I connect my old PowerMac 7500/100 (OS8.0) to the same rig, I have no problem. This leads me to believe that it is a missing setting on the PowerPC 4400/200 (OS8.0) or maybe the PowerPC is incompatible.
   
  Emulatorarchive does state that the PowerPC is compatible.
   
  I just can't make the PowerPC communicate with the EII.
   
  Best regards
   
  Brian
  Denmark
   
  Maybe it's a setting

Marko Laukka <markolaukka@...> skrev:
          Have you checked that MIDI is enabled and set to channel 1 on EII? If you have any MIDI cables attached pull them off from EII, that should do the trick.

/Marko

brian_ronn <brian_ronn@...> skrev:
Hi fellow EII users

I've installed OS8.0 on a PowerPC 4400/200 and I have tried to make 
the PowerPC communicate with the EII. Unfortunately without any luck.

I've tried with apletalk active for the printer and modem and in the 
inactive mode. Disk cache is permanently on, ram disk on and off and 
virtuel memory on and off too without success.

I have a PowerMac 7500/100 with OS 8.0 which communicate well with 
the EII with the same cable. The PowerMac is working with ApleTalk 
active, disk cache on, virtuel memory on and ram disk on but this 
doesn't seem to work with the PowerPC.

According to emulatorarchive the PowerPC should work too, but how. 
Does any of you know how?

Best regards

Brian
Denmark 

---------------------------------
Ta semester! - sök efter resor hos Yahoo! Shopping. 
Jämför pris på flygbiljetter och hotellrum: http://shopping.yahoo.se/c-169901-resor-biljetter.html

[Non-text portions of this message have been removed]



                         

       
---------------------------------

 Trænger du til at se det store billede? Kelkoo giver dig gode tilbud på LCD TV! 

[Non-text portions of this message have been removed]

SV: [emulatorII-list] SDII communication problem on a PowerPC 4400/200

2008-02-05 by Kenneth Abildgaard

Hi Brian.

 

Just wanted to say hi to another Dane.

I hope you work things out.


And in Danish:

 

Hej Brian. Dejligt at se en anden fra Danmark herinde – det er vist første
gang J

Håber du får skidtet til at virke.

 

Kenneth Abildgaard

12bit.com

 

Fra: emulatorII-list@yahoogroups.com
[mailto:emulatorII-list@yahoogroups.com] På vegne af Brian Ronn
Sendt: 5. februar 2008 11:17
Til: emulatorII-list@yahoogroups.com
Emne: SV: [emulatorII-list] SDII communication problem on a PowerPC 4400/200

 

Hi Marko

Thank you for your advice.

I have a midicable connected but the midipatch bay is turned off, so the
midi causes no problem. When I connect my old PowerMac 7500/100 (OS8.0) to
the same rig, I have no problem. This leads me to believe that it is a
missing setting on the PowerPC 4400/200 (OS8.0) or maybe the PowerPC is
incompatible.

Emulatorarchive does state that the PowerPC is compatible.

I just can't make the PowerPC communicate with the EII.

Best regards

Brian
Denmark

Maybe it's a setting

Marko Laukka <markolaukka@... <mailto:markolaukka%40yahoo.se> > skrev:
Have you checked that MIDI is enabled and set to channel 1 on EII? If you
have any MIDI cables attached pull them off from EII, that should do the
trick.

/Marko

brian_ronn <brian_ronn@... <mailto:brian_ronn%40yahoo.dk> > skrev:
Hi fellow EII users

I've installed OS8.0 on a PowerPC 4400/200 and I have tried to make 
the PowerPC communicate with the EII. Unfortunately without any luck.

I've tried with apletalk active for the printer and modem and in the 
inactive mode. Disk cache is permanently on, ram disk on and off and 
virtuel memory on and off too without success.

I have a PowerMac 7500/100 with OS 8.0 which communicate well with 
the EII with the same cable. The PowerMac is working with ApleTalk 
active, disk cache on, virtuel memory on and ram disk on but this 
doesn't seem to work with the PowerPC.

According to emulatorarchive the PowerPC should work too, but how. 
Does any of you know how?

Best regards

Brian
Denmark 

---------------------------------
Ta semester! - sök efter resor hos Yahoo! Shopping. 
Jämför pris på flygbiljetter och hotellrum:
http://shopping.yahoo.se/c-169901-resor-biljetter.html

[Non-text portions of this message have been removed]

---------------------------------

Trænger du til at se det store billede? Kelkoo giver dig gode tilbud på LCD
TV! 

[Non-text portions of this message have been removed]

 



[Non-text portions of this message have been removed]